Improvement of the cyclone separation efficiency with a magnetic field

被引:24
作者
Siadaty, Moein [1 ]
Kheradmand, Saeid [1 ]
Ghadiri, Fatemeh [1 ]
机构
[1] Malek Ashtar Univ Technol, Dept Mech & Aerosp Engn, Shahin Shahr, Isfahan, Iran
关键词
Magnetic field; Separation efficiency; Cyclone separator; Response surface methodology; CFD simulation; PRESSURE-DROP; FLOW PATTERN; OPTIMIZATION; SIMULATION; INLET; PERFORMANCE; GEOMETRY; DESIGN; ANGLE;
D O I
10.1016/j.jaerosci.2017.09.015
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
In this paper, an attempt is made to improve the gas-solid cyclone collection efficiency by applying a low strength magnetic field. At first, Eulerian-Lagrangian approach is utilized to model the fluid flow and track a large number of solid particles inside a high efficiency Stairmand cyclone with body diameter of 0.3 m. Then, response surface methodology (RSM) is used to design a series of experiments with magnetic number, horizontal and vertical distance of the magnetic field source from the origin as the effective parameters. Finally, desirability function is used to calculate the values of the effective parameters at which the efficiency has its highest value. Furthermore, a comprehensive study on the effect of magnetic field parameters on separation efficiency is done by means of sensitivity analysis. The results show that a low strength magnetic field can increase the separation efficiency for 2 and 4 mu m particles from 82.96% and 97.78% to 91.11% and 100%, respectively. Analysis of response surface methodology declare that there is a strong interaction between the magnetic number and the position of the magnetic source. Sensitivity analysis shows that separation efficiency is highly sensitive to the vertical distance of the magnetic source from the origin, rather than horizontal distance and magnetic number. Moreover, the total separation efficiency is increased by 1.1% at its optimum value. Increase in separation efficiency without a change in pressure drop and cyclone geometry configuration are the main advantages of this method.
引用
收藏
页码:219 / 232
页数:14
相关论文
共 32 条
[1]   Modified shear stress transport model with curvature correction for the prediction of swirling flow in a cyclone separator [J].
Alahmadi, Yaser H. ;
Nowakowski, Andrzej F. .
CHEMICAL ENGINEERING SCIENCE, 2016, 147 :150-165
[2]  
[Anonymous], 1911, Philosophical Transactions of the Royal Society A, DOI DOI 10.1098/RSTA.1911.0009
[3]   Experimental research on the dynamics of airflow parameters in a six-channel cyclone-separator [J].
Baltrenas, Pranas ;
Chlebnikovas, Aleksandras .
POWDER TECHNOLOGY, 2015, 283 :328-333
[4]   Analysis and optimization of multi-inlet gas cyclones using large eddy simulation and artificial neural network [J].
Brar, Lakhbir Singh ;
Elsayed, Khairy .
POWDER TECHNOLOGY, 2017, 311 :465-483
[5]   The effect of the cyclone length on the performance of Stairmand high-efficiency cyclone [J].
Brar, Lakhbir Singh ;
Sharma, R. P. ;
Elsayed, Khairy .
POWDER TECHNOLOGY, 2015, 286 :668-677
[6]   Entropy generation analysis on cyclone separators with different exit pipe diameters and inlet dimensions [J].
Duan, Lu ;
Wu, Xiaolin ;
Ji, Zhongli ;
Fang, Qixian .
CHEMICAL ENGINEERING SCIENCE, 2015, 138 :622-633
[7]   Design of a novel gas cyclone vortex finder using the adjoint method [J].
Elsayed, Khairy .
SEPARATION AND PURIFICATION TECHNOLOGY, 2015, 142 :274-286
[8]   Optimization of the cyclone separator geometry for minimum pressure drop using Co-Kriging [J].
Elsayed, Khairy .
POWDER TECHNOLOGY, 2015, 269 :409-424
[9]   CFD modeling and multi-objective optimization of cyclone geometry using desirability function, artificial neural networks and genetic algorithms [J].
Elsayed, Khairy ;
Lacor, Chris .
APPLIED MATHEMATICAL MODELLING, 2013, 37 (08) :5680-5704
[10]   Numerical modeling of the flow field and performance in cyclones of different cone-tip diameters [J].
Elsayed, Khairy ;
Lacor, Chris .
COMPUTERS & FLUIDS, 2011, 51 (01) :48-59