Photoelastic evaluation of fiber surface-treatments on the interfacial performance of a polyester fiber/epoxy model composite

被引：8

作者：

Flores-Johnson, E. A. ^{[2
]}

Vazquez-Rodriguez, J. M. ^{[3
]}

Herrera-Franco, P. J. ^{[1
]}

Gonzalez-Chi, P. I. ^{[1
]}

机构：

[1] Ctr Invest Cient Yucatan, AC, Unidad Mat Calle 43, Merida 97200, Yucatan, Mexico

[2] Australian Nucl Sci & Technol Org, Inst Mat Engn, Kirrawee Dc, NSW 2232, Australia

[3] Univ Juarez Autonoma Tabasco, Villahermosa 86000, Tabasco, Mexico

来源：

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2011年 / 42卷 / 08期

关键词：

Fiber/matrix bond; Optical properties/techniques; Stress transfer; Photoelasticity; EPOXY COMPOSITES; SHEAR STRESSES; KEVLAR FIBER; MATRIX; ADHESION; PLASMA;

D O I：

10.1016/j.compositesa.2011.04.005

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The interfacial adhesion between a polyester fiber and an epoxy matrix was improved by chemical and topological modifications of the fiber surface. The maximum interfacial shear strength was measured using photoelasticity to assess the interfacial performance in pull-out single-fiber composite specimens. An increase of the interfacial shear strength was observed when plasma-treated or surface-modified fibers were used: also, as the applied load to the free fiber was increased, the fiber treatment caused a reduction of the debonded area at the fiber-matrix interface. (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：1017 / 1024

页数：8

共 18 条

[1] THE GLASS-FIBER POLYMER INTERFACE .1. THEORETICAL CONSIDERATION FOR SINGLE FIBER PULL-OUT TESTS [J].

CHUA, PS ;

PIGGOTT, MR .

COMPOSITES SCIENCE AND TECHNOLOGY, 1985, 22 (01) :33-42

[2]

Cloud G, 2002, EXP TECHNIQUES, V26, P13, DOI 10.1111/j.1747-1567.2002.tb00078.x

[3] Synthesis of polyaniline films by plasma polymerization [J].

Cruz, GJ ;

Morales, J ;

CastilloOrtega, MM ;

Olayo, R .

SYNTHETIC METALS, 1997, 88 (03) :213-218

[4] Deformation micromechanics of a thermoplastic-thermoset interphase of epoxy composites reinforced with poliethylene fiber [J].

Gonzalez-Chi, PI ;

Young, RJ .

JOURNAL OF MATERIALS SCIENCE, 2004, 39 (23) :7049-7059

[5] COMPARISON OF METHODS FOR THE MEASUREMENT OF FIBER MATRIX ADHESION IN COMPOSITES [J].

HERRERAFRANCO, PJ ;

DRZAL, LT .

COMPOSITES, 1992, 23 (01) :2-27

[6] THE BONDING MECHANISM OF ARAMID FIBERS TO EPOXY MATRICES .1. A REVIEW OF THE LITERATURE [J].

KALANTAR, J ;

DRZAL, LT .

JOURNAL OF MATERIALS SCIENCE, 1990, 25 (10) :4186-4193

[7] Adhesion of PBO fiber in epoxy composites [J].

Maerder, E. ;

Melcher, S. ;

Liu, J. W. ;

Gao, S. L. ;

Bianchi, A. D. ;

Zherlitsyn, S. ;

Wosnitza, J. .

JOURNAL OF MATERIALS SCIENCE, 2007, 42 (19) :8047-8052

[8] Reinforcing effects of Kevlar fiber on the mechanical properties of wood-flour/high-density-polyethylene composites [J].

Ou, Rongxian ;

Zhao, Hui ;

Sui, Shujuan ;

Song, Yongming ;

Wang, Qingwen .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2010, 41 (09) :1272-1278

[9] A method to measure fracture toughness of the fiber/matrix interface using the single-fiber fragmentation test [J].

Ramirez, F. A. ;

Carlsson, L. A. ;

Acha, B. A. .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2009, 40 (6-7) :679-686

[10]

SCHUSTER DM, 1964, T METALL SOC AIME, V230, P1635

← 1 2 →