Effect of thermal treatment on the crystal structure and morphology of zirconia nanopowders produced by three different routes

Zirconia ZrO2 nanopowders have been successfully prepared via three processing routes, namely, conventional precipitation (CP), citrate gel combustion (CGC) and microemulsion refined precipitation (MRP). The formed zirconia particles were characterized using X-ray diffraction analysis (XRD), scanning electron microscope (SEM), Fourier transformer infrared (FT-IR) spectroscopy and UV-visible absorption spectrum. The results showed that the CP route led to the formation of tetragonal ZrO2 phase with low crystallinity at 700 degrees C and the formed tetragonal phase was transformed to monoclinic ZrO2 phase at temperatures ranged from 1000 to 1200 degrees C. The CGC route led to formation of monoclinic phase without presence tetragonal phase species in the temperatures range from 1000 to 1200 degrees C. In contrast, MRP technique led to the formation of tetragonal phase with high crystallinity compared with the other processing at 700 degrees C and the produced tetragonal phase was inverted to cubic phase by increasing the calcination temperatures from 1000 to 1200 degrees C. SEM showed that the morphology of the produced zirconia nanopowders changed according to synthesis routes and thermally treated temperatures. (c) 2007 Elsevier B.V. All rights reserved.