Nickel oxide films by thermal annealing of ion-beam-sputtered Ni: Structure and electro-optical properties

被引:5
|
作者
Horak, P. [1 ]
Remes, Z. [2 ]
Bejsovec, V. [1 ]
Vacik, J. [1 ]
Danis, S. [3 ]
Kormunda, M. [4 ]
机构
[1] Acad Sci Czech Republ, Nucl Phys Inst, CZ-25068 Rez, Czech Republic
[2] Acad Sci Czech Republ, Inst Phys, Cukrovarnicka 10-112, CR-16200 Prague, Czech Republic
[3] Charles Univ Prague, Fac Math & Phys, Dept Condensed Matter Phys, Ke Karlovu 5, CR-12116 Prague, Czech Republic
[4] Jan Evangelista Purkyne Univ Usti Nad Labem, Dept Phys, Ceske Mladeze 8, Usti Nad Labem 40096, Czech Republic
关键词
NiO; Ion beam sputtering; Thermal annealing; Nuclear analytical methods; Optical properties; PHOTOTHERMAL DEFLECTION SPECTROSCOPY; THIN-FILMS; OPTICAL-PROPERTIES; ELECTRICAL-PROPERTIES; SPRAY-PYROLYSIS; GAS-DETECTION; DEPOSITION; SPECTRA; METAL; HFO2;
D O I
10.1016/j.tsf.2017.08.047
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Nickel oxide films were prepared by thermal annealing of Ni deposited by ion beam sputtering on Si (or glass) substrates. The annealing was carried out in a laboratory furnace open to air at temperatures 350 degrees C-500 degrees C with annealing time 1-7 h (1-h step). For as-deposited Ni films the sheet resistance R-S was found to be 8.39 Omega/square and no significant XRD diffraction peaks were observed. The thermal annealing resulted in significant changes in composition and electrical, structural and optical properties. The oxidation process led to a rapid growth of R-S up to 10(9)Omega/square, appearance of the optical absorption edge for oxidized Ni, and the formation of a polycrystalline NiO structure with the main NiO (111) diffraction peak. At 350 degrees C the annealing yielded 3-stage behavior of the sheet resistance due to limited oxidation during short time annealing. Longer processing times (>3 h) were necessary to successfully oxidize the deposited Ni film, after 1 h annealing the oxygen content (analyzed by nuclear resonance analysis) showed a significantly lower concentration within the depth of a sample; more uniform composition was found after prolonged annealing. XPS analysis showed the formation of a significant amount of nickel hydroxide at the surface. It was confirmed by ERDA. The optical properties were studied by Photothermal Deflection Spectroscopy (PDS). The data correlate with the 3-stage behavior of sheet resistance at 350 degrees C, suggesting lower oxidation during short-term annealing, while transparent nickel oxide films were formed during longer annealing and at higher temperatures. Based on analysis of the obtained experimental data (from measurement of the sheet resistance, XRD diffraction and optical absorption spectra), the temperature of 400 degrees C was found to be optimal for the formation of the fully oxidized NiO films. (C) 2017 Elsevier B.V. All rights reserved.
引用
收藏
页码:52 / 59
页数:8
相关论文
共 50 条
  • [41] Effect of Annealing Temperature and Oxygen Flow in the Properties of Ion Beam Sputtered SnO2-x Thin Films
    Wang, Chun-Min
    Huang, Chun-Chieh
    Kuo, Jui-Chao
    Sahu, Dipti Ranjan
    Huang, Jow-Lay
    MATERIALS, 2015, 8 (08) : 5289 - 5297
  • [42] Effect of gas-timing technique on structure and optical properties of sputtered zinc oxide films
    Klaitabtim, Don
    Pratontep, Sirapat
    Nukeaw, Jiti
    CERAMICS INTERNATIONAL, 2008, 34 (04) : 1103 - 1107
  • [43] Correlation between structure, stress and optical properties in direct current sputtered molybdenum oxide films
    Mohamed, SH
    Kappertz, O
    Ngaruiya, JM
    Pedersen, TPL
    Drese, R
    Wuttig, M
    THIN SOLID FILMS, 2003, 429 (1-2) : 135 - 143
  • [44] Direct-current-sputtered nickel oxide (NiO) films with improved p-type conduction characteristic: impact of substrate temperature on structure, optical and electrical properties
    Gao, Xiaoyong
    Meng, Xue
    Li, Binqi
    PHYSICA SCRIPTA, 2023, 98 (08)
  • [45] Effect of Annealing Temperature on Structural and Optical Properties of Nickel Oxide Thin Films by Dip coating Method
    Meenakshi, Latha Jithendrakumar
    Aswathy, Balakrishnan Remani
    Manoj, Poonthamannil Karunakarapanicker
    INTERNATIONAL CONFERENCE ON ENERGY AND ENVIRONMENT 2019 (ICEE 2K19), 2020, 2287
  • [46] Structure and optical properties of dc reactive magnetron sputtered zinc oxide films
    Subramanyam, TK
    Naidu, BS
    Uthanna, S
    CRYSTAL RESEARCH AND TECHNOLOGY, 1999, 34 (08) : 981 - 988
  • [47] Zinc oxide thin films on silicon carbide substrates (ZnO/SiC): electro-optical properties and electrically active defects
    Felix, J. F.
    Aziz, M.
    de Araujo, C. I. L.
    de Azevedo, W. M.
    Anjos, V.
    da Silva, E. F., Jr.
    Henini, M.
    SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 2014, 29 (04)
  • [48] Annealing effects on the optical and structural properties of Si thin films deposited by ion beam sputtering technique
    Li Shida
    Liu Huasong
    Jiang Yugang
    He Jiahuan
    Wang Lishuan
    Ji Yiqin
    OPTIK, 2019, 181 : 695 - 702
  • [49] Modifications of structural and optical properties of copper oxide thin films by thermal annealing
    Han, In-Sub
    Park, Ji-Soo
    Park, Il-Kyu
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2019, 20 (06): : 660 - 664
  • [50] Microstructure and electro-optical properties of Cu-Ni co-doped AZO transparent conducting thin films by sol-gel method
    Zhang, Xinglai
    Hui, K. S.
    Hui, K. N.
    Cho, Y. R.
    Zhou, Wei
    Mane, Rajaram S.
    Chun, Ho-Hwan
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2015, 26 (02) : 1151 - 1158