Microstructure and Oxidation Behavior of Anti-Oxidation Coatings on Mo-Based Alloys through HAPC Process: A Review

被引：23
作者：
Fu, Tao [1 ]
Cui, Kunkun [1 ]
Zhang, Yingyi [1 ]
Wang, Jie [1 ]
Zhang, Xu [1 ]
Shen, Fuqiang [1 ]
Yu, Laihao [1 ]
Mao, Haobo [1 ]
机构：
[1] Anhui Univ Technol, Sch Met Engn, Maanshan 243002, Peoples R China
来源：
COATINGS | 2021年 / 11卷 / 08期
基金：
中国国家自然科学基金;
关键词：
molybdenum alloys; coating; oxidation; microstructure; mechanism; review; HIGH-TEMPERATURE OXIDATION; HOT DEFORMATION-BEHAVIOR; Y CODEPOSITION COATINGS; TZM ALLOY; SI-B; MOSI2; SUBSTRATE; PROTECTION; AL; RESISTANCE;
D O I：
10.3390/coatings11080883
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Mo and Mo-based alloys are important aerospace materials with excellent high temperature mechanical properties. However, their oxidation resistance is very poor at high temperature, and the formation of volatile MoO3 will lead to catastrophic oxidation failure of molybdenum alloy components. Extensive research on the poor oxidation problem has indicated that the halide activated pack cementation (HAPC) technology is an ideal method to solve the problem. In this work, the microstructure, oxide growth mechanism, oxidation characteristics, and oxidation mechanism of the HAPC coatings were summarized and analyzed. In addition, the merits and demerits of HPAC techniques are critically examined and the future scope of research in the domain is outlined.
引用
收藏
页数：11
相关论文
共 52 条
  • [1] High temperature oxidation of Mo-Si-B alloys: Effect of low and very low oxygen partial pressures
    Burk, Steffen
    Gorr, Bronislava
    Christ, Hans-Juergen
    [J]. ACTA MATERIALIA, 2010, 58 (18) : 6154 - 6165
  • [2] Studies on the development of protective coating on TZM alloy and its subsequent characterization
    Chakraborty, S. P.
    Banerjee, S.
    Singh, Kulwant
    Sharma, I. G.
    Grover, A. K.
    Suri, A. K.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 207 (1-3) : 240 - 247
  • [3] Development of silicide coating over molybdenum based refractory alloy and its characterization
    Chakraborty, S. P.
    Banerjee, S.
    Sharma, I. G.
    Suri, A. K.
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2010, 403 (1-3) : 152 - 159
  • [4] Hot deformation behaviour of Mo-TZM and understanding the restoration processes involved
    Chaudhuri, Atanu
    Behera, Ananta N.
    Sarkar, Apu
    Kapoor, Rajeev
    Ray, Ranjit K.
    Suwas, Satyam
    [J]. ACTA MATERIALIA, 2019, 164 : 153 - 164
  • [5] Microstructure and mechanical properties of CaAl12O19 reinforced Al2O3-Cr2O3 composites
    Cui, Kunkun
    Fu, Tao
    Zhang, Yingyi
    Wang, Jie
    Mao, Haobo
    Tan, Tianbiao
    [J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2021, 41 (15) : 7935 - 7945
  • [6] Effects of Cr2O3 Content on Microstructure and Mechanical Properties of Al2O3 Matrix Composites
    Cui, Kunkun
    Zhang, Yingyi
    Fu, Tao
    Hussain, Shahid
    Saad Algarni, Tahani
    Wang, Jie
    Zhang, Xu
    Ali, Shafaqat
    [J]. COATINGS, 2021, 11 (02) : 1 - 17
  • [7] Fracture resistance of hierarchical Cu-Mo nanocomposite thin films
    Cui, Yuchi
    Derby, Benjamin
    Li, Nan
    Misra, Amit
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 799
  • [8] Oxidation protection of tungsten alloys for nuclear fusion applications: A comprehensive review
    Fu, Tao
    Cui, Kunkun
    Zhang, Yingyi
    Wang, Jie
    Shen, Fuqiang
    Yu, Laihao
    Qie, Junmao
    Zhang, Xu
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 884
  • [9] Stress design of a laminated MoSi2/Cr coating under particle impact and high temperature environment
    Hu, Dou
    Fu, Qiangang
    Zhou, Lei
    Zhang, Yuyu
    Zhang, Guangpeng
    [J]. CERAMICS INTERNATIONAL, 2020, 46 (08) : 10696 - 10703
  • [10] CALPHAD-type modeling of the C-Hf-Mo system over the whole composition and temperature ranges
    Huang, Lei
    Pan, Yafei
    Zhang, Jiuxing
    Du, Yong
    Luo, Fenghua
    Zhang, Shuyan
    [J]. THERMOCHIMICA ACTA, 2020, 692
123456