Crack Size Identification for Bearings Using an Adaptive Digital Twin

被引:19
作者
Piltan, Farzin [1 ]
Kim, Jong-Myon [1 ]
机构
[1] Univ Ulsan, Dept Elect Elect & Comp Engn, Ulsan 44610, South Korea
关键词
rotating machine; bearing; digital twin; gaussian process regression; Laguerre filter; fuzzy logic; proportional integral observer; Lyapunov robust algorithm; adaptive technique; support vector machine; fault diagnosis; CLASSIFICATION;
D O I
10.3390/s21155009
中图分类号
O65 [分析化学];
学科分类号
070302 ; 081704 ;
摘要
In this research, the aim is to investigate an adaptive digital twin algorithm for fault diagnosis and crack size identification in bearings. The main contribution of this research is to design an adaptive digital twin (ADT). The design of the ADT technique is based on two principles: normal signal modeling and estimation of signals. A combination of mathematical and data-driven techniques will be used to model the normal vibration signal. Therefore, in the first step, the normal vibration signal is modeled to increase the reliability of the modeling algorithm in the ADT. Then, to help challenge the complexity and uncertainty, the data-driven method will solve the problems of the mathematically based algorithm. Thus, first, Gaussian process regression is selected, and then, in two steps, we improve its resistance and accuracy by a Laguerre filter and fuzzy logic algorithm. After modeling the vibration signal, the second step is to design the data estimation for ADT. These signals are estimated by an adaptive observer. Therefore, a proportional-integral observer is then combined with the proposed technique for signal modeling. Then, in two stages, its robustness and reliability are strengthened using the Lyapunov-based algorithm and adaptive technique, respectively. After designing the ADT, the residual signals that are the difference between original and estimated signals are obtained. After that, the residual signals are resampled, and the root means square (RMS) signals are extracted from the residual signals. A support vector machine (SVM) is recommended for fault classification and crack size identification. The strength of the proposed technique is tested using the Case Western Reserve University Bearing Dataset (CWRUBD) under diverse torque loads, various motor speeds, and different crack sizes. In terms of fault diagnosis, the average detection accuracy in the proposed scheme is 95.75%. In terms of crack size identification for the roller, inner, and outer faults, the proposed scheme has average detection accuracies of 97.33%, 98.33%, and 98.33%, respectively.
引用
收藏
页数:24
相关论文
共 50 条
  • [1] An Adaptive-Backstepping Digital Twin-Based Approach for Bearing Crack Size Identification Using Acoustic Emission Signals
    Piltan, Farzin
    Kim, Jong-Myon
    INTELLIGENT SYSTEMS DESIGN AND APPLICATIONS, ISDA 2021, 2022, 418 : 538 - 547
  • [2] Strict-Feedback Backstepping Digital Twin and Machine Learning Solution in AE Signals for Bearing Crack Identification
    Piltan, Farzin
    Toma, Rafia Nishat
    Shon, Dongkoo
    Im, Kichang
    Choi, Hyun-Kyun
    Yoo, Dae-Seung
    Kim, Jong-Myon
    SENSORS, 2022, 22 (02)
  • [3] Crack Localization of Pipelines Using Machine Learning and Fuzzy Digital Twin
    Piltan, Farzin
    Kim, Jong-Myon
    12TH INTERNATIONAL CONFERENCE ON ICT CONVERGENCE (ICTC 2021): BEYOND THE PANDEMIC ERA WITH ICT CONVERGENCE INNOVATION, 2021, : 337 - 342
  • [4] Modeling of a Digital Twin for Magnetic Bearings
    Taha, Omer W.
    Hu, Yefa
    APPLIED SCIENCES-BASEL, 2023, 13 (14):
  • [5] Bearing Crack Diagnosis Using a Smooth Sliding Digital Twin to Overcome Fluctuations Arising in Unknown Conditions
    Piltan, Farzin
    Kim, Cheol-Hong
    Kim, Jong-Myon
    APPLIED SCIENCES-BASEL, 2022, 12 (13):
  • [6] Fault Detection in Active Magnetic Bearings Using Digital Twin Technology
    Hu, Yefa
    Taha, Omer W.
    Yang, Kezhen
    APPLIED SCIENCES-BASEL, 2024, 14 (04):
  • [7] Personalized fault diagnosis of rolling bearings in trains based on digital twin
    Liu, Chang
    He, Deqiang
    Wei, Zexian
    He, Changfu
    Lao, Zhenpeng
    Shan, Sheng
    MEASUREMENT SCIENCE AND TECHNOLOGY, 2023, 34 (12)
  • [8] A parameter-interactive digital twin model of bearings under variable speeds
    Song, Wenchang
    Guo, Liang
    Yu, Yaoxiang
    Gao, Hongli
    Xu, Hao
    Feng, Tingting
    MEASUREMENT, 2025, 244
  • [9] Digital Twin of a Gear Root Crack Prognosis
    Matania, Omri
    Bechhoefer, Eric
    Bortman, Jacob
    SENSORS, 2023, 23 (24)
  • [10] Physics-based digital twin updating and twin-based explainable crack identification of mechanical lap joint
    Kim, Wongon
    Youn, Byeng D.
    RELIABILITY ENGINEERING & SYSTEM SAFETY, 2025, 253