On the investigation of energy saving aspects of commercial lifts

被引:6
作者
Papanikolaou, N. [1 ]
Loupis, M. [2 ]
Spiropoulos, N. [3 ]
Mitronikas, E. [4 ]
Tatakis, E. [4 ]
Christodoulou, C. [1 ]
Zarikas, V. [2 ]
Tsiftsis, T. [2 ]
机构
[1] Democritus Univ Thrace, Elect Machines Lab, V Sofias 12, Xanthi 67100, Greece
[2] TEI Cent Greece, Dept Elect Engn, Lamia Campus, Lamia 35100, Greece
[3] KLEEMANN HELLAS SA, Ind Area Kilkis, R&D Dept, Kilkis 61100, Greece
[4] Univ Patras, Lab Electromech Energy Convers, Patras 26504, Greece
关键词
Energy saving; Elevators; Regenerative braking; SYSTEM; REGENERATION;
D O I
10.1007/s12053-016-9495-y
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
This paper investigates energy efficiency issues in modern lifts, based on the VDI 4707 guidelines, in the context of "KLEEMANN-LESS" research project, funded by national resources and the EU. The above analysis is applied to various lift types manufactured by the Greek multinational company IeLEEMAN HELLAS. The obtained results indicate the relationship between critical technical parameters, such as the elevator driving system type and the standby energy consumption, according to the aforementioned standard. Furthermore, in the current work, new techniques for energy savings are proposed, employing realistic scenarios, which significantly enhance energy efficiency. Experimental work shows that an energy saving of up to 40% can be achieved. The outputs of the current work are not limited to lift models manufactured by KLEEMAN HELLAS, but concern the majority of lift manufacturers as well.
引用
收藏
页码:945 / 956
页数:12
相关论文
共 50 条
[31]   Energy optimisation using analytics and coordination, the example of lifts [J].
Boutin, Veronique ;
Desdouits, Chloe ;
Louvel, Maxime ;
Pacull, Francois ;
Vergara-Gallego, Maria Isabel ;
Yaakoubi, Oussama ;
Chomel, Cedric ;
Crignon, Quentin ;
Duhoux, Christophe ;
Genon-Catalot, Denis ;
Lefevre, Laurent ;
Thanh Hung Pham ;
Van Thang Pham .
2014 IEEE EMERGING TECHNOLOGY AND FACTORY AUTOMATION (ETFA), 2014,
[32]   Installation of a 400-W Wind Turbine Generator on a Commercial Fishing Boat to Achieve Energy Saving [J].
Wang, Li ;
Chen, Shiang-Shong ;
Zheng, Guang-Zhe ;
Lu, Zhi-Rong ;
Hsiung, Chia-Tien ;
Huang, Chen-Bin ;
Huang, Cheng-Ching .
IEEE POWER AND ENERGY SOCIETY GENERAL MEETING 2010, 2010,
[33]   Energy Saving at Cities [J].
Perea-Moreno, Alberto-Jesus ;
Manzano-Agugliaro, Francisco .
ENERGIES, 2020, 13 (15)
[34]   Experimental Investigation and Control of a Hot-Air Tunnel with Improved Performance and Energy Saving [J].
Navratil, Pavel ;
Pekar, Libor ;
Matusu, Radek ;
Song, Mengjie ;
Gao, Qingbin ;
Kandala, Shanti S. ;
Kadlcik, Ondrej .
ACS OMEGA, 2021, 6 (24) :16194-16215
[35]   Investigation of energy saving potentials in T-junction and elbow in compressed air systems [J].
M. T. Sambandam ;
N. A. Madlool ;
R. Saidur ;
D. Devaraj ;
S. Rajakarunakaran .
Energy Efficiency, 2017, 10 :1099-1113
[36]   Experimental Investigation of Natural Lighting Systems Using Cylindrical Glass for Energy Saving in Buildings [J].
Thongtha, Atthakorn ;
Boontham, Piromporn .
ENERGIES, 2020, 13 (10)
[37]   STRUCTURE OPTIMIZATION AND ENERGY SAVING POTENTIAL INVESTIGATION OF NOVEL INTERGRATED VENTILATED PV ROOF [J].
Peng J. ;
Zhang Q. ;
Zhou C. ;
Zhang S. ;
Zhang F. ;
Luo Y. .
Taiyangneng Xuebao/Acta Energiae Solaris Sinica, 2023, 44 (12) :24-32
[38]   Investigation on the heat transfer and energy-saving performance of microchannel with cavities and extended surface [J].
Zhang, Dongwei ;
Fu, Luotong ;
Guan, Jian ;
Shen, Chao ;
Tang, Songzhen .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2022, 189
[39]   Investigation on the heat transfer and energy-saving performance of microchannel with cavities and extended surface [J].
Zhang, Dongwei ;
Fu, Luotong ;
Guan, Jian ;
Shen, Chao ;
Tang, Songzhen .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2022, 189
[40]   Investigation of energy saving potentials in T-junction and elbow in compressed air systems [J].
Sambandam, M. T. ;
Madlool, N. A. ;
Saidur, R. ;
Devaraj, D. ;
Rajakarunakaran, S. .
ENERGY EFFICIENCY, 2017, 10 (05) :1099-1113