Novel tin oxide-based anodes for Li-ion batteries

被引:162
|
作者
Belliard, F [1 ]
Connor, PA [1 ]
Irvine, JTS [1 ]
机构
[1] Univ St Andrews, Sch Chem, St Andrews KY16 9ST, Fife, Scotland
基金
英国工程与自然科学研究理事会;
关键词
Li-ion battery; metal oxide; tin oxide; lithium insertion;
D O I
10.1016/S0167-2738(00)00296-4
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Three new possible Li-ion battery negative electrode materials, ZnO, ZnO:SnO2 ball-milled mixture and Zn2SnO4, were prepared, and tested electrochemically. These new materials have smaller capacities than SnO2, but still show reversible capacities around 500 mA h g(-1). The charge and discharge profiles of all the materials are similar, with potentials close to that of the Li+/Li(m) couple. A large loss of capacity between the initial and the later cycles, is observed similar to the tin oxides, due to the required reduction of the tin and zinc ions to the bulk metal. These materials do show some promise as Li-ion battery anodes due to their large reversible lithium capacity at low potentials. (C) 2000 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:163 / 167
页数:5
相关论文
共 50 条
  • [21] Cobalt Carbonate/and Cobalt Oxide/Graphene Aerogel Composite Anodes for High Performance Li-Ion Batteries
    Garakani, Mohammad Akbari
    Abouali, Sara
    Zhang, Biao
    Takagi, Curtis Alton
    Xu, Zheng-Long
    Huang, Jian-qiu
    Huang, Jiaqiang
    Kim, Jang-Kyo
    ACS APPLIED MATERIALS & INTERFACES, 2014, 6 (21) : 18971 - 18980
  • [22] Electrochemical characteristics of Tin-based anode material for Li-ion secondary batteries
    Oh, Jangwon
    Cho, Kihyun
    Lee, Taewon
    Hwang, Insoo
    Jang, Siyoul
    Shin, Dongwook
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2008, 9 (01): : 52 - 56
  • [23] Recent advances in Sb-based anodes for Li/Na/K-ion batteries and all-solid-state Li-ion batteries
    Yoon, Jeong-Myeong
    Kim, Deok-Gyu
    Kim, Do-Hyeon
    Lee, Young-Han
    Park, Cheol-Min
    ENERGY MATERIALS, 2024, 4 (06):
  • [24] Novel Parametric Circuit Modeling for Li-Ion Batteries
    Cheng, Ximing
    Yao, Liguang
    Xing, Yinjiao
    Pecht, Michael
    ENERGIES, 2016, 9 (07):
  • [25] Tailoring of SiOC composition as a way to better performing anodes for Li-ion batteries
    Wilamowsk, M.
    Pradeep, V. S.
    Graczyk-Zajac, M.
    Riedel, R.
    Soraru, G. D.
    SOLID STATE IONICS, 2014, 260 : 94 - 100
  • [26] A new look at the solid electrolyte interphase on graphite anodes in Li-ion batteries
    Edström, K
    Herstedt, M
    Abraham, DP
    JOURNAL OF POWER SOURCES, 2006, 153 (02) : 380 - 384
  • [27] Decorating of Manganese Oxide Nanowires with Tin Oxide for Li-Ion Battery Anode
    Liu, Fei
    Liu, Jun
    Xue, Dongfeng
    ENERGY AND ENVIRONMENT FOCUS, 2012, 1 (02) : 105 - 108
  • [28] Titania-Based Freestanding Electronically Conductive Electrospun Anodes with Enhanced Performance for Li-Ion Batteries
    Charkhesht, Vahid
    Yurum, Alp
    Gursel, Selmiye Alkan
    Kaplan, Begum Yarar
    ACS APPLIED ENERGY MATERIALS, 2021, 4 (12) : 13922 - 13931
  • [29] Arcing in Li-Ion Batteries
    Ledinski, Theo
    Golubkov, Andrey W.
    Schweighofer, Oskar
    Erker, Simon
    BATTERIES-BASEL, 2023, 9 (11):
  • [30] Generalized Synthesis of Metal Oxide Nanosheets and Their Application as Li-Ion Battery Anodes
    AbdelHamid, Ayman A.
    Yu, Yue
    Yang, Jinhua
    Ying, Jackie Y.
    ADVANCED MATERIALS, 2017, 29 (32)