Fracture properties of asphalt mixtures containing electric arc furnace slag at low and intermediate temperatures

被引：61

作者：

Motevalizadeh, S. M. ^{[1
]}

Sedghi, R. ^{[1
]}

Rooholamini, H. ^{[1
]}

机构：

[1] Tarbiat Modares Univ, Civil & Environm Engn Dept, Tehran, Iran

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2020年 / 240卷

关键词：

Electric arc furnace slag; Fracture properties; Semi-circular bending test; Pull-off adhesion test; WARM-MIX ASPHALT; STEEL SLAG; BENDING TEST; LOADING RATE; PERFORMANCE; RESISTANCE; AGGREGATE; STRENGTH; CONCRETE; ENERGY;

D O I：

10.1016/j.conbuildmat.2019.117965

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The present study made an effort to investigate the impact of partial and full replacement of mineral aggregate with Electric Arc Furnace (EAF) steel slag on the fracture and temperature susceptibility properties of both Hot Mix Asphalt (HMA) and Warm Mix Asphalt (WMA). For this reason, the Semi-Circular Bending (SCB) and Pull-off adhesion tests were carried out. With respect to SCB test at 0 degrees C and -20 degrees C, dependent and independent Linear Elastic Fracture Mechanic (LEFM) approaches were employed over specimens, containing 50% fine, 50% and 100% coarse EAF slag. Pull-off adhesion test was conducted to evaluate temperature susceptibility of bituminous mastics in the presence of EAF slag filler. Based on the LEFM investigation, by increase of EAF slag content, the asphalt mixtures revealed highly dependency on the testing temperature. In addition, application of Elastic Plastic Fracture Mechanic (EPFM) approach manifested that the Fracture Process Zone (FPZ) size of various asphalt mixtures could be correlated to the mixture composition, aggregate and asphalt binder types. Subsequently, the presence of EAF slag in the Sasobit modified asphalt mixtures had a positive synergic effect in declining the temperature susceptibility of asphalt fracture resistance at low-temperature compared with HMA. (C) 2019 Elsevier Ltd. All rights reserved.

引用

页数：11

共 49 条

[1] Influence of high content of reclaimed asphalt on the mechanical properties of cement-treated base under critical environmental conditions [J].

Adresi, Mostafa ;

Khishdari, Abolfazl ;

Ahmadi, Amin ;

Rooholamini, Hamed .

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 2019, 20 (09) :1098-1105

[2]

Alinezhad M., 2019, CASE STUD CONSTR MAT, V11, DOI DOI 10.1016/J.CSCM.2019.E00265E00265

[3]

Ameri M, 2018, SEALS AND SEALING IN THE ANCIENT WORLD: CASE STUDIES FROM THE NEAR EAST, EGYPT, THE AEGEAN, AND SOUTH ASIA, P1

[4] Influence of Production Temperature and Aggregate Moisture Content on the Initial Performance of Warm-Mix Asphalt [J].

Bennert, Thomas ;

Maher, Ali ;

Sauber, Robert .

TRANSPORTATION RESEARCH RECORD, 2011, (2208) :97-107

[5]

Cominsky R.J., 1994, SUPERIOR PERFORMING, P170

[6] Effects of Regular and Nano Sized Hydrated Lime Fillers on Fatigue and Bond Strength Behavior of Asphalt Mastic [J].

Das, Aditya Kumar ;

Singh, Dharamveer .

TRANSPORTATION RESEARCH RECORD, 2018, 2672 (28) :31-41

[7] The potential use of steel slag in refractory concrete [J].

Ducman, V. ;

Mladenovic, A. .

MATERIALS CHARACTERIZATION, 2011, 62 (07) :716-723

[8]

F.H. Administration, 2006, FHWAHIF12031, P1

[9] Mixed mode tensile - In plane shear fracture energy determination for hot mix asphalt mixtures under intermediate temperature conditions [J].

Fakhri, M. ;

Kharrazi, E. Haghighat ;

Aliha, M. R. M. .

ENGINEERING FRACTURE MECHANICS, 2018, 192 :98-113

[10] The effect of loading rate on fracture energy of asphalt mixture at intermediate temperatures and under different loading modes [J].

Fakhri, M. ;

Kharrazi, E. Haghighat ;

Aliha, M. R. M. ;

Berto, F. .

FRATTURA ED INTEGRITA STRUTTURALE, 2018, (43) :113-132

← 1 2 3 4 5 →