A New Current Control of High Instantaneous Power Impulse Converter

被引:0
|
作者
Zajac, Ludwik [1 ]
Malinowski, Mariusz [1 ]
Stynski, Sebastian [1 ]
Jasinski, Marek [1 ]
机构
[1] Warsaw Univ Technol, Inst Control & Ind Elect, Koszykowa 75, PL-00662 Warsaw, Poland
来源
IECON 2015 - 41ST ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY | 2015年
关键词
VELOCITY POSITIVE-IONS;
D O I
暂无
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
This paper presents a new control algorithm of High Instantaneous Power Impulse Converter (HIPIC). HIPIC is characterized by high power in megawatt range delivered to the output in very short time. A new algorithm allows fast rising of output current to the set value and a proper peak current control during the impulse by using two types of controllers: hysteresis and PID. Moreover capacitor voltage change compensation (CCVC) has been introduced because high power impulse causes significant discharge of capacitors in this system. Additionally, interleave of switching for parallel transistor yields an improvement of the output peak current control. Thanks to all of those features the output current control response is accurate, fast in range of few microseconds and it allows operation in very dynamic conditions. The output current is almost rectangular in shape.
引用
收藏
页码:42 / 47
页数:6
相关论文
共 50 条
  • [1] A New Topology of High Instantaneous Power Impulse Converter
    Zajac, Ludwik
    Malinowski, Mariusz
    Stynski, Sebastian
    Jasinski, Marek
    2016 10TH INTERNATIONAL CONFERENCE ON COMPATIBILITY, POWER ELECTRONICS AND POWER ENGINEERING (CPE-POWERENG), 2016, : 319 - 324
  • [2] DEVELOPMENT OF A PULSE POWER CONVERTER WITH A DSP INSTANTANEOUS CURRENT CONTROL
    UJIIE, A
    TANAKA, S
    TAKAHARA, E
    MIYAZAKI, A
    IECON 89, VOLS 1-4: POWER ELECTRONICS - SIGNAL-PROCESSING & SIGNAL CONTROL - FACTORY AUTOMATION, EMERGING TECHNOLOGIES, 1989, : 143 - 148
  • [3] Current control techniques applied in PFC boost converter at instantaneous power interruption
    Jappe, Tiago Kommers
    Mussa, Samir Ahmad
    IECON: 2009 35TH ANNUAL CONFERENCE OF IEEE INDUSTRIAL ELECTRONICS, VOLS 1-6, 2009, : 312 - +
  • [4] High power factor converter control by instantaneous single-phase current for a Maglev system linear generator
    Railway Technical Research Institute, 2-8-38, Hikari-cho, Kokubunji-shi 185-8540
    IEEJ Trans. Ind Appl., 2006, 2 (186-191):
  • [5] High power factor converter control by instantaneous single-phase current for a maglev system linear generator
    Murai, T.
    Sakamoto, Y.
    Hasegawa, H.
    2007 POWER CONVERSION CONFERENCE - NAGOYA, VOLS 1-3, 2007, : 1125 - +
  • [6] Predictive Current Control with Modification of instantaneous Reactive Power Minimization for Direct Matrix Converter
    Roostaee, Mehdi
    Eskandari, Bahman
    Azizi, Mohammad Reza
    9TH ANNUAL POWER ELECTRONICS, DRIVES SYSTEMS, AND TECHNOLOGIES CONFERENCE (PEDSTC2018), 2018, : 199 - 205
  • [7] Unified High Voltage Direct Current Converter Control Dedicated for New Power Systems
    Wen, Jinyu
    Zhang, Haobo
    Xiang, Wang
    Meng, Peiyu
    Lin, Weixing
    Zhou, Meng
    Zuo, Wenping
    Cheng, Shijie
    Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2024, 44 (18): : 7068 - 7083
  • [8] An Indirect Model Predictive Current Control for a Direct Matrix Converter with Instantaneous Reactive Power Minimization
    Rivera, M.
    Toledo, S.
    Wheeler, P.
    2017 IEEE SOUTHERN POWER ELECTRONICS CONFERENCE (SPEC), 2017, : 25 - 30
  • [9] CONTROL OF POWER-FACTOR CORRECTING BOOST CONVERTER WITHOUT INSTANTANEOUS MEASUREMENT OF INPUT CURRENT
    SIVAKUMAR, S
    NATARAJAN, K
    GUDELEWICZ, R
    IEEE TRANSACTIONS ON POWER ELECTRONICS, 1995, 10 (04) : 435 - 445
  • [10] DISCRETE-TIME CURRENT CONTROL TECHNIQUES APPLIED IN PFC BOOST CONVERTER AT INSTANTANEOUS POWER INTERRUPTION
    Jappe, Tiago Kommers
    Mussa, Samir Alunad
    2009 BRAZILIAN POWER ELECTRONICS CONFERENCE, VOLS 1 AND 2, 2009, : 916 - 921