Residual stresses in glass after molding and its influence on optical properties

被引：21
|
作者：
Yi, A. Y. [1 ]
Tao, B. [1 ]
Klocke, F. [2 ]
Dambon, O. [2 ]
Wang, F. [2 ]
机构：
[1] Ohio State Univ, Dept Integrated Syst Engn, 210 Baker Syst,1971 Neal Ave, Columbus, OH 43210 USA
[2] Fraunhofer Inst Prod Technol, D-54004 Aachen, Germany
来源：
1ST CIRP CONFERENCE ON SURFACE INTEGRITY (CSI) | 2011年 / 19卷
关键词：
Glass; Residual Stress; Finite Element Method (FEM); Optical;
D O I：
10.1016/j.proeng.2011.11.132
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Compression molding of glass optics is gradually becoming a viable manufacturing process for high precision optical lenses. However, during cooling, glass properties undergo a small amount of changes due to structural relaxation. As a result, residual stresses are trapped inside the molded glass lenses. In this research, compression molded lenses were studied using the birefringence method assisted by the finite element analysis. The experimental and simulation results showed that compression molding process can be controlled to a very high precision providing that the proper cooling is applied during cooling. In addition, numerical analysis using finite element analysis also provides a better understand of the cooling process and offers an economic solution for process optimization for low cost glass lens production. (C) 2012 Published by Elsevier Ltd. Selection and peer-review under responsibility of Prof. E. Brinksmeier
引用
收藏
页数：5
相关论文
共 50 条
  • [31] Influence of beating and chemical additives on residual stresses in paper
    Gimaker, Magnus
    Ostlund, Magnus
    Ostlund, Soren
    Wagberg, Lars
    NORDIC PULP & PAPER RESEARCH JOURNAL, 2011, 26 (04) : 445 - 451
  • [32] Influence of thermal residual stresses on the composite macroscopic behavior
    Hu, GK
    Weng, GJ
    MECHANICS OF MATERIALS, 1998, 27 (04) : 229 - 240
  • [33] On the influence of welding residual stresses on the dynamic behavior of structures
    Bezerra, A. C.
    Vieira, L. C.
    Rade, D. A.
    Scotti, A.
    SHOCK AND VIBRATION, 2008, 15 (3-4) : 447 - 458
  • [34] Influence of Induction Hardening Process on Camshafts' Residual Stresses
    Zhou, Honggen
    Zhao, Donghao
    Liu, Yunlong
    Li, Guochao
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2020, 45 (11) : 9651 - 9659
  • [35] Influence of Induction Hardening Process on Camshafts’ Residual Stresses
    Honggen Zhou
    Donghao Zhao
    Yunlong Liu
    Guochao Li
    Arabian Journal for Science and Engineering, 2020, 45 : 9651 - 9659
  • [36] INFLUENCE OF VIBRATIONS ON RESIDUAL STRESSES DISTRIBUTION IN WELDED JOINTS
    Samardzic, I.
    Vuherer, T.
    Maric, D.
    Konjatic, P.
    METALURGIJA, 2015, 54 (03): : 527 - 530
  • [37] Residual stresses in a bulk metallic glass cylinder induced by thermal tempering
    Aydiner, CC
    Üstündag, E
    MECHANICS OF MATERIALS, 2005, 37 (01) : 201 - 212
  • [38] Grating resette and its application in measuring residual stresses
    Chen, JB
    Yu, ZY
    Lin, ZY
    THIRD INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS, 2002, 4537 : 245 - 248
  • [39] Residual stresses in continuous glass fiber polypropylene composite thermoformed parts
    Youssef, Y
    Denault, J
    43RD INTERNATIONAL SAMPE SYMPOSIUM AND EXHIBITION ON MATERIALS AND PROCESS AFFORDABILITY - KEYS TO THE FUTURE, VOL 43, 1998, : 641 - 651
  • [40] A validated modelling technique for incorporating residual stresses in glass structural design
    Achintha, Mithila
    STRUCTURES, 2021, 29 : 446 - 457
12345