Microstructure and XRD analysis in the interface zone of Mg/Al diffusion bonding

被引:38
作者
Wang Juan [1 ]
Li Yajiang [1 ]
Liu Peng [1 ]
Geng Haoran [2 ]
机构
[1] Shandong Univ, Key Lab Liquid Struct & Hered Mat, Sch Mat Sci & Engn, Jinan 250061, Peoples R China
[2] Jinan Univ, Sch Mat Sci & Engn, Jinan 250022, Peoples R China
基金
中国国家自然科学基金;
关键词
intermetallic compounds; x-ray diffraction; microstructure diffusion;
D O I
10.1016/j.jmatprotec.2007.11.096
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The microstructure and phase constituent for the Mg/Al diffusion bonded joint were studied via scanning electron microscope (SEM) and X-ray diffraction (XRD). The test results indicated that the new compact phase was formed near the transition region of Mg/Al diffusion interface. There are three new phase layers in the transition region. The fracture morphology mainly consists of coarse and gray fracture, and the fracture is mainly the mixed fracture of cleavage and brittleness. X-ray diffraction test indicates that the diffusion zone of Mg/Al diffusion bonded joint consists of intermetallic compounds MgAl, Mg3Al2 and Mg2Al3. With the increase of heating temperature, the content Of Mg3Al2 and Mg2Al3 phases with good stability was improved. (c) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码:146 / 150
页数:5
相关论文
共 50 条
  • [41] Effect of Interface on Mechanical Properties of Ti/Al/Mg/Al/Ti Laminated Composites
    Cao, Miao
    Wang, Cui-ju
    Deng, Kun-kun
    Nie, Kai-bo
    Liang, Wei
    Wu, Yu-cheng
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2020, 23 (01):
  • [42] Diffusion bonding at the interface of Bi2Te3 thermoelectric modules
    Yen Ngoc Nguyen
    Son, Injoon
    MATERIALS CHEMISTRY AND PHYSICS, 2022, 292
  • [43] Effect of iron on the microstructure and mechanical property of Al-Mg-Si-Mn and Al-Mg-Si diecast alloys
    Ji, Shouxun
    Yang, Wenchao
    Gao, Feng
    Watson, Douglas
    Fan, Zhongyun
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 564 : 130 - 139
  • [44] The microstructure of the diffusion zone of a gaseously nitrided Fe-1.5 wt-% Cr-1.5 wt-%Al alloy
    Clauss, A. R.
    Bischoff, E.
    Schacherl, R. E.
    Mittemeijer, E. J.
    MATERIALS SCIENCE AND TECHNOLOGY, 2010, 26 (03) : 297 - 308
  • [45] The Effects of Cu Powder on the Interface Microstructure Evolution of Hot-Rolled Al 6061/Mg M21/Al 6061 Composite Plates During Annealing
    Yang, Na
    Jiang, Xianquan
    Zhang, Ruihao
    Li, Jian
    Zheng, Kaihong
    Pan, Fusheng
    MATERIALS, 2025, 18 (03)
  • [46] As-cast microstructure of Mg-Al-Zn magnesium alloys
    Zhang Jing
    Pan Fu-sheng
    Yang Ming-bo
    Li Zhong-sheng
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2006, 16 : S1655 - S1659
  • [47] Effect of secondary rolling on the interfacial bonding strength and mechanical properties of Al/Mg/Al clad plates
    Cao, Xiang
    Xu, Chun
    Li, Yu
    Cao, Xuecheng
    Peng, Ruizhi
    Fang, Junyi
    PHILOSOPHICAL MAGAZINE LETTERS, 2022, 102 (5-6) : 200 - 208
  • [48] As-cast microstructure of Mg-Al-Zn magnesium alloys
    张静
    潘复生
    杨明波
    李忠盛
    TransactionsofNonferrousMetalsSocietyofChina, 2006, (S3) : 1655 - 1659
  • [49] INFLUENCE OF MANGANESE ON THE MICROSTRUCTURE OF SECONDARY ALLOYS Al-Si-Mg
    Wieszala, Robert
    Piatkowski, Jaroslaw
    Kozuba, Jaroslaw
    28TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2019), 2019, : 1230 - 1240
  • [50] Ultrafast ultrasonic-assisted transient liquid bonding Al/Mg in air
    Li, Zhengwei
    Xu, Zhiwu
    Peng, Liming
    Yan, Jiuchun
    MATERIALS CHARACTERIZATION, 2022, 190