Modeling permanent mold casting of aluminum

被引：0

作者：

Cook, Daniel P. ^{[1
]}

Deshmukh, Sachin S. ^{[1
]}

Carey, David P. ^{[1
]}

机构：

[1] Univ Nevada, Dept Mech Engn, Las Vegas, NV 89154 USA

来源：

PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION 2007, VOL 8, PTS A AND B: HEAT TRANSFER, FLUID FLOWS, AND THERMAL SYSTEMS | 2008年

关键词：

D O I：

暂无

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

Modeling the complex, coupled fluid flow, heat transfer and solidification phenomena taking place in metal casting is a challenging task. The quality of any metal casting depends on many parameters such as the type of mould, rate of filling, and rate of solidification. Optimization of these operational parameters is very important in reducing casting defects such as oxide inclusions and porosity. This paper addresses the first steps in validating a computational fluid dynamics (CFD) model of permanent mold casting of aluminum. A mathematical model of the casting system has been developed using the commercial CFD package StarCD. A physical model of the system has been used to validate the mold filling phenomena in the process. Comparison of the results from these models will be presented.

引用

页码：1825 / 1828

页数：4

共 50 条

[21] Permanent Mold Casting of Ductile Iron [J].

Lerner, Yury S. .

Foundry Management and Technology, 2003, 131 (10) :18-22

[22] Heat transfer in permanent mold casting [J].

Nguyen, T ;

Gunasegaram, D ;

Luo, L ;

Esdaile, R .

ADVANCES IN ALUMINUM CASTING TECHNOLOGY, 1998, :191-197

[23] IMPROVEMENT IN PERMANENT MOLD CASTING PROCESSES [J].

PORTALIE.R .

REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 1972, 69 (12) :833-845

[24] Measuring Mold Cavity Filling Time in Low Pressure Permanent Mold Casting of Aluminum A356 Parts [J].

Chiesa, F. ;

Giguere, N. ;

Duchesne, B. ;

Baril, J. .

TRANSACTIONS OF THE AMERICAN FOUNDRY SOCIETY, VOL 119, 2011, 119 :141-+

[25] Manufacture of Aluminum Cylinder Heads by the Low Pressure Permanent Mold Casting Process. [J].

Watanabe, Masatoshi ;

Goto, Shizuo ;

Takahashi, Tomayuki .

Giesserei, 1974, 61 (03) :58-63

[26] Computer-aided design of a semi-permanent mold for the casting of an aluminum spool [J].

Tan, RK ;

Arimilli, R ;

Parang, M .

ADVANCES IN ALUMINUM CASTING TECHNOLOGY, 1998, :85-93

[27] New approaches in microcasting: permanent mold casting and composite casting [J].

G. Baumeister ;

D. Buqezi-Ahmeti ;

J. Glaser ;

H.-J. Ritzhaupt-Kleissl .

Microsystem Technologies, 2011, 17 :289-300

[28] Permanent Mold Casting of JIS-AC4C Aluminum Alloy Using a Low-Temperature Mold [J].

Yamagata, Hiroshi ;

Nikawa, Makoto .

INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS ONE AND TWO, 2010, 1315 :719-724

[29] METAL MOLD DEVELOPMENT FOR ALUMINUM CASTING [J].

Ragan, Kyle ;

Herrera, Brendan ;

McLennan, Jeremy ;

Noack, Aaron ;

Casteel, Tyler ;

Crain, Nick .

INTERNATIONAL JOURNAL OF METALCASTING, 2016, 10 (01) :107-110

[30] New approaches in microcasting: permanent mold casting and composite casting [J].

Baumeister, G. ;

Buqezi-Ahmeti, D. ;

Glaser, J. ;

Ritzhaupt-Kleissl, H. -J. .

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2011, 17 (02) :289-300

← 1 2 3 4 5 →