The effect of microstructure on the electrical performance of Ag-WC-C contact materials

被引:15
|
作者
Allen, SE [1 ]
Streicher, E [1 ]
机构
[1] AMI DODUCO, Export, PA 15632 USA
来源
ELECTRICAL CONTACTS - 1998 | 1998年
关键词
arcing; breaker; carbon; circuit; contact; erosion; graphite; interruption; silver; tungsten carbide; weld;
D O I
10.1109/HOLM.1998.722456
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
Silver - tungsten carbide - graphite contacts of varying microstructures were investigated to determine the effect on contact erosion, sticking, resistance, and current interruption The parameters examined were graphite particle size and silver particle size. Statistically significant results were weld strength after contact bounce at 400 amperes peak weight loss after 10,000 operations at 141 amperes peak, and weight loss and resistance after interruption at 1,920 amperes peak. For the Ag-WC-C composition tested, the use of fine graphite and fine silver powders led to enhanced electrical performance.
引用
收藏
页码:276 / 285
页数:10
相关论文
共 50 条
  • [1] Effect of WC particle size and Ag volume fraction on electrical contact resistance and thermal conductivity of Ag-WC contact materials
    Ray, Nachiketa
    Kempf, Bernd
    Muetzel, Timo
    Froyen, Ludo
    Vanmeensel, Kim
    Vleugels, Jef
    MATERIALS & DESIGN, 2015, 85 : 412 - 422
  • [2] Effect of Ni addition on the contact resistance of Ag-WC electrical contacts
    Ray, Nachiketa
    Kempf, Bernd
    Muetzel, Timo
    Heringhaus, Frank
    Froyen, Ludo
    Vanmeensel, Kim
    Vleugels, Jef
    JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 670 : 188 - 197
  • [3] Preparation by Different Methods and Characterization of Ag/ZnO Composite for Application in Electrical Contact Materials
    Wei Zhijun
    Zhang Lingjie
    Shen Qianhong
    Chen Lawson
    Fan Xianping
    Yang Hui
    RARE METAL MATERIALS AND ENGINEERING, 2016, 45 : 513 - 517
  • [4] Influence of contact geometry and current on effective erosion of Cu-Cr, Ag-WC and Ag-Cr vacuum contact materials
    Schulman, MB
    Slade, PG
    Loud, LD
    Li, W
    ELECTRICAL CONTACTS - 1998, 1998, : 307 - 315
  • [5] Effect of Internal Electrical Field on the Electrical Breakdown Properties of Contact Materials
    Liu, Junru
    Xiao, Peng
    Wang, Xianhui
    Liang, Shuhua
    Liu, Hanyang
    SUSTAINABLE CONSTRUCTION MATERIALS AND COMPUTER ENGINEERING, 2012, 346 : 154 - +
  • [6] In situ formation and doping of Ag/SnO2 electrical contact materials
    Li, Guijing
    Fang, Xueqian
    Feng, Wenjie
    Liu, Jinxi
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 716 : 106 - 111
  • [7] A Novel Method for the Preparation of Ag/SnO2 Electrical Contact Materials
    Qiao Xiuqing
    Shen Qianhong
    Zhang Lingjie
    Lawson, Chen
    Fan Xianping
    Yang Hui
    RARE METAL MATERIALS AND ENGINEERING, 2014, 43 (11) : 2614 - 2618
  • [8] Influence of operation number on arc erosion behavior of Ag/Ni electrical contact materials
    Huang, Run-zhang
    Xu, Guo-fu
    Wu, Qiong
    Yuan, Meng
    Wu, Chun-ping
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2022, 32 (08) : 2681 - 2695
  • [9] Comparison of Electrical Performance of CuCr Contact Materials Manufactured by Two Methods
    Li, Peng
    Yao, Xiaofei
    Zhang, Shi Song
    Wang, Xiaojun
    Gang, Li
    Liu, Zhiyuan
    PROCEEDINGS OF THE 2018 28TH INTERNATIONAL SYMPOSIUM ON DISCHARGES AND ELECTRICAL INSULATION IN VACUUM (ISDEIV 2018), VOL 2, 2018, : 607 - 609
  • [10] Fabrication and Arc Erosion Behavior of Ag-SnO2-ZnO Electrical Contact Materials
    Guzman, Danny
    Gonzalez, Felipe
    Muranda, Diego
    Aguilar, Claudio
    Guzman, Alexis
    Soliz, Alvaro
    Lozada, Lorena
    Iturriza, Inigo
    Castro, Felipe
    MATERIALS, 2023, 16 (10)