Large eddy simulation of a slot jet impinging on a convex surface

被引:18
作者
Benhacine, Adra [2 ]
Kharoua, Nabil [1 ]
Khezzar, Lyes [1 ]
Nemouchi, Zoubir [2 ]
机构
[1] Petr Inst, Dept Mech Engn, Abu Dhabi, U Arab Emirates
[2] Univ Mentouri Constantine, LEAP, Dept Genie Mecan, Constantine, Algeria
关键词
TURBULENT PLANE JET; HEAT-TRANSFER; ROUND JET; FLOW; IMPINGEMENT; VISUALIZATION; CLOSURE; REGION; MODEL;
D O I
10.1007/s00231-011-0835-3
中图分类号
O414.1 [热力学];
学科分类号
摘要
A large eddy simulation is used to simulate flow and heat transfer in a turbulent plane jet with two distances from the jet-exit to impingement corresponding to twice and ten times the slot nozzle width. The resolved different unsteady vortex motions of the jet shear layers are studied and shown to have an important influence on heat transfer at the wall. They are used to explain existence of the second peak in Nusselt number for the case corresponding to twice the slot nozzle width. The predicted average surface Nusselt number profiles exhibit good agreement with experiments.
引用
收藏
页码:1 / 15
页数:15
相关论文
共 38 条
  • [1] Addad Y, 2008, ERCOFTAC SER, V12, P93
  • [2] ANSYS Inc, 2009, FLUENT US GUID FLUEN
  • [3] Large eddy simulations of plane turbulent impinging jets at moderate Reynolds numbers
    Beaubert, F
    Viazzo, S
    [J]. INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2003, 24 (04) : 512 - 519
  • [4] BELTAOS S, 1973, J HYDRAUL RES, V1, P29
  • [5] THE INTERACTION REGION OF A TURBULENT PLANE JET
    BROWNE, LWB
    ANTONIA, RA
    CHAMBERS, AJ
    [J]. JOURNAL OF FLUID MECHANICS, 1984, 149 (DEC) : 355 - 373
  • [6] Heat transfer characteristics of a slot jet impinging on a semi-circular convex surface
    Chan, TL
    Leung, CW
    Jambunathan, K
    Ashforth-Frost, S
    Zhou, Y
    Liu, MH
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2002, 45 (05) : 993 - 1006
  • [7] Flow visualization of a round jet impinging on cylindrical surfaces
    Cornaro, C
    Fleischer, AS
    Goldstein, RJ
    [J]. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 1999, 20 (02) : 66 - 78
  • [8] IMPINGING JET STUDIES FOR TURBULENCE MODEL ASSESSMENT .2. AN EXAMINATION OF THE PERFORMANCE OF 4 TURBULENCE MODELS
    CRAFT, TJ
    GRAHAM, LJW
    LAUNDER, BE
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1993, 36 (10) : 2685 - 2697
  • [9] Large-eddy simulation of flow and heat transfer in an impinging slot jet
    Cziesla, T
    Biswas, G
    Chattopadhyay, H
    Mitra, NK
    [J]. INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2001, 22 (05) : 500 - 508
  • [10] The influence of nozzle aspect ratio on plane jets
    Deo, R. C.
    Mi, J.
    Nathan, G. J.
    [J]. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2007, 31 (08) : 825 - 838