Study on phase transformation of Fe-Ni powders during mechanical alloying

被引：23

作者：

Zhu, LH ^{[1
]}

Ma, XM ^{[1
]}

Zhao, L ^{[1
]}

机构：

[1] Shanghai Univ, Dept Mat Sci & Engn, Shanghai 200072, Peoples R China

来源：

JOURNAL OF MATERIALS SCIENCE | 2001年 / 36卷 / 23期

基金：

中国国家自然科学基金;

关键词：

D O I：

10.1023/A:1012501312896

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Fe-Ni ultra-fine particles were prepared by mechanical alloying and phase transformation during mechanical alloying was studied. Results show that phase transformation tendency is different during mechanical alloying of Fe-Ni powders with different nickel content. For Fe-30Ni powder, martensite is the only product obtained with the increase of milling time, while for Fe-35Ni powder, a part of martensite has been transformed into austenite when milling time is prolonged to above 40 h. It indicates that the nickel content plays an important role in the phase transformation tendency during mechanical alloying of Fe-Ni powders. (C) 2001 Kluwer Academic Publishers.

引用

页码：5571 / 5574

页数：4

共 50 条

[21] Phase transformations in Fe-Ni system at mechanical alloying and consequent annealing of elemental powder mixtures [J].

Kaloshkin, SD ;

Tcherdyntsev, VV ;

Tomilin, IA ;

Baldokhin, YV ;

Shelekhov, EV .

PHYSICA B, 2001, 299 (3-4) :236-241

[22] Mechanical alloying of Fe+32 at.% Ni powders [J].

Tsurin, VA ;

Barinov, VA ;

Pupyshev, SB .

FIZIKA METALLOV I METALLOVEDENIE, 1996, 81 (05) :108-117

[23] Relaxation of the structure of Fe-Ni alloys during mechanical alloying induced by severe plastic deformation [J].

Shabashov, V. A. ;

Sagaradze, V. V. ;

Litvinov, A. V. ;

Zamatovskii, A. E. .

PHYSICS OF METALS AND METALLOGRAPHY, 2015, 116 (09) :869-878

[24] Formation and sintering behavior of nanocrystalline Fe-Ni powder by mechanical alloying [J].

Chen, WG ;

Gu, CQ ;

Ding, BJ .

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2003, 10 (03) :75-78

[25] Formation and Sintering Behavior of Nanocrystalline Fe-Ni Powder by Mechanical Alloying [J].

CHEN Wenge ;

GU Chenqing ;

DING Bingjun .

Journal of Iron and Steel Research(International), 2003, 10 (03) :75-78

[26] Investigation of the Absorption Properties of the Alloys Fe-Ni and Fe-Ni-Cr Prepared by Mechanical Alloying [J].

Gu Shuchao ;

Duan Yuping ;

Duan Peng ;

Wang Song ;

Qiu Guoping ;

Liu Yuzhe .

JOURNAL OF ELECTRONIC MATERIALS, 2015, 44 (07) :2331-2339

[27] Effect of pressure on the magnetization of Fe-Ni and Fe-Ni-Cu alloys prepared by mechanical alloying [J].

Yamagata, T ;

Ino, H ;

Yamada, M ;

Goto, T .

JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2004, 68 (04) :252-256

[28] Investigation of the Absorption Properties of the Alloys Fe-Ni and Fe-Ni-Cr Prepared by Mechanical Alloying [J].

Gu Shuchao ;

Duan Yuping ;

Duan Peng ;

Wang Song ;

Qiu Guoping ;

Liu Yuzhe .

Journal of Electronic Materials, 2015, 44 :2331-2339

[29] A MICROSTRUCTURAL STUDY OF MECHANICAL ALLOYING OF FE AND SN POWDERS [J].

LECAER, G ;

MATTEAZZI, P ;

FULTZ, B .

JOURNAL OF MATERIALS RESEARCH, 1992, 7 (06) :1387-1395

[30] Structure and Magnetic Property of Amorphous Fe-Ni Particles Prepared by Mechanical Alloying [J].

XU Shi yue HE Zheng ming WANG Zhong cheng ZHANG Zheng ming ZHANG Jian hua ZHONG Min jian Department of Physics College of Sciences Shanghai University Shanghai China .

Journal of Shanghai University, 2001, (02) :147-150

← 1 2 3 4 5 →