Study on phase transformation of Fe-Ni powders during mechanical alloying

被引：23
|
作者：
Zhu, LH [1 ]
Ma, XM [1 ]
Zhao, L [1 ]
机构：
[1] Shanghai Univ, Dept Mat Sci & Engn, Shanghai 200072, Peoples R China
来源：
JOURNAL OF MATERIALS SCIENCE | 2001年 / 36卷 / 23期
基金：
中国国家自然科学基金;
关键词：
D O I：
10.1023/A:1012501312896
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Fe-Ni ultra-fine particles were prepared by mechanical alloying and phase transformation during mechanical alloying was studied. Results show that phase transformation tendency is different during mechanical alloying of Fe-Ni powders with different nickel content. For Fe-30Ni powder, martensite is the only product obtained with the increase of milling time, while for Fe-35Ni powder, a part of martensite has been transformed into austenite when milling time is prolonged to above 40 h. It indicates that the nickel content plays an important role in the phase transformation tendency during mechanical alloying of Fe-Ni powders. (C) 2001 Kluwer Academic Publishers.
引用
收藏
页码：5571 / 5574
页数：4
相关论文
共 50 条
  • [1] Study on phase transformation of Fe-Ni powders during mechanical alloying
    Li-Hui Zhu
    Xue-Ming Ma
    Ling Zhao
    Journal of Materials Science, 2001, 36 : 5571 - 5574
  • [2] Phase transformation during mechanical alloying of Fe-Ni
    Yang, Junyou
    Zhang, Tongjun
    Hu, Zhenhua
    Cui, Kun
    Huazhong Ligong Daxue Xuebao/Journal Huazhong (Central China) University of Science and Technology, 1995, 23 (12):
  • [3] Study of Fe-Ni alloys produced by mechanical alloying
    Valderruten, J. F.
    Alcazar, G. A. Perez
    Greneche, J. M.
    PHYSICA B-CONDENSED MATTER, 2006, 384 (1-2) : 316 - 318
  • [4] Hindering of Martensitic transformations by mechanical alloying of Fe-Mn and Fe-Ni powders
    Pustov, LY
    Kaloshkin, SD
    Estrin, EI
    Principi, G
    Spataru, T
    Tscherdyntsev, VV
    Tomilin, IA
    Shelekhov, EV
    METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, 2003, : 221 - 226
  • [5] Effect of nickel content and milling parameters on martensitic transformation of Fe-Ni during mechanical alloying
    Zhu, LH
    Huang, QW
    Zhao, HF
    SCRIPTA MATERIALIA, 2004, 51 (06) : 527 - 531
  • [6] Phase transformations during deformation of Fe-Ni and Fe-Mn alloys produced by mechanical alloying
    Cherdyntsev, V. V.
    Pustov, L. Yu.
    Kaloshkin, S. D.
    Tomilin, I. A.
    Shelekhov, E. V.
    Laptev, A. I.
    Baldokhin, Yu. V.
    Estrin, E. I.
    PHYSICS OF METALS AND METALLOGRAPHY, 2007, 104 (04): : 408 - 414
  • [7] Phase transformations during deformation of Fe-Ni and Fe-Mn alloys produced by mechanical alloying
    V. V. Cherdyntsev
    L. Yu. Pustov
    S. D. Kaloshkin
    I. A. Tomilin
    E. V. Shelekhov
    A. I. Laptev
    Yu. V. Baldokhin
    E. I. Estrin
    The Physics of Metals and Metallography, 2007, 104 : 408 - 414
  • [8] Martensitic transformation in ultrafine Fe-Ni powders
    Zhou, Ying-Hui
    Harmelin, Mireille
    Bigot, Jean
    Materials Science and Engineering A, 1990, A124 (02): : 241 - 249
  • [9] Preparation of nanocrystalline Fe-Ni powders by mechanical alloying used in soft magnetic composites
    Koohkan, R.
    Sharafi, S.
    Shokrollahi, H.
    Janghorban, K.
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2008, 320 (06) : 1089 - 1094
  • [10] PREPARATION OF FE-NI BASED METAL-METALLOID AMORPHOUS POWDERS BY MECHANICAL ALLOYING
    SURINACH, S
    SUNOL, JJ
    BARO, MD
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1994, 181 : 1285 - 1290
12345