Superelastic effect in Ti-rich high entropy alloys via stress-induced martensitic transformation

被引:48
作者
Wang, Lu [1 ]
Fu, Chao [1 ]
Wu, Yidong [1 ]
Li, Runguang [1 ]
Hui, Xidong [1 ]
Wang, Yandong [1 ]
机构
[1] Univ Sci & Technol Beijing, State Key Lab Adv Met & Mat, Beijing 100083, Peoples R China
基金
中国国家自然科学基金;
关键词
High entropy alloys; Stress-induced martensitic transformation; Superelastic effect; In situ X-ray diffraction; X-RAY-DIFFRACTION; MEMORY; TEMPERATURE; BEHAVIOR; ZR; MICROSTRUCTURE; SN;
D O I
10.1016/j.scriptamat.2018.10.035
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
This letter reports an outstanding superelastic effect in Ti-rich TiZrHfAlNb high entropy alloys for the first time, which is exhibited by comprehensive combination of the maximum total recovery strain, fully recoverable strain and corresponding tensile strength up to 5.2%, 4.0% and 900 MPa, respectively. It has been confirmed that these alloys are only composed of metastable beta and martensite alpha '' phase, and to phase is suppressed. The in situ X-ray diffraction experiment reveals that reversible stress-induced martensitic transformation between beta <-> alpha '' endows the alloys superelasticity, while the plastic deformation and reorientation of martensite inhibit the recovery phase transformation. (C) 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:112 / 117
页数:6
相关论文
共 50 条
  • [21] In situ study of stress-induced martensitic transformation in Ni47Ti44Nb9 shape-memory alloys
    Liu, Hongtao
    Sun, Guangai
    Wang, Yandong
    Chen, Bo
    Wang, Xiaolin
    Tian, Qiang
    ADVANCES IN MATERIALS AND MATERIALS PROCESSING, PTS 1-3, 2013, 652-654 : 1096 - 1101
  • [22] Martensitic transformation behaviors of Ti-rich Ti-Ni alloy fibers fabricated by melt overflow
    Kim, Yeon-wook
    Jang, Seung-kyu
    MATERIALS RESEARCH BULLETIN, 2013, 48 (12) : 5045 - 5048
  • [23] A Stress-Induced Martensitic Transformation in Aged Ti49Ni51 Alloy after High-Velocity Impact
    Zhu, Yingying
    Wang, Haizhen
    Gao, Zhiyong
    Cai, Wei
    MATERIALS, 2016, 9 (07)
  • [24] The effect of strain rate on trigger stress for stress-induced martensitic transformation and yield strength in Ti-18Al-8Nb alloy
    Paradkar, Archana
    Kamat, S. V.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 496 (1-2) : 178 - 182
  • [25] Effect of deformation on the stress-induced martensitic transformation in (Ni47Ti44)100−xNbx shape memory alloys with wide hysteresis
    X. M. He
    L. J. Rong
    Metals and Materials International, 2006, 12 : 279 - 288
  • [26] High-temperature martensitic transformation of CuNiHfTiZr high- entropy alloys
    Chang, Shan-Hsiu
    Lin, Po-Ting
    Tsai, Che-Wei
    SCIENTIFIC REPORTS, 2019, 9 (1)
  • [27] Influence of α morphology and volume fraction on the stress-induced martensitic transformation in Ti-10V-2Fe-3Al
    Li, C.
    Wu, X.
    Chen, J. H.
    van der Zwaag, S.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (18): : 5854 - 5860
  • [28] Tribological properties of deflected NiTi superelastic archwire using a new experimental set-up: Stress-induced martensitic transformation effect
    Ben Naceur, Ines
    Elleuch, Khaled
    TRIBOLOGY INTERNATIONAL, 2020, 146
  • [29] Structure and properties of Ti-rich Ti-Zr-Nb-Mo medium-entropy alloys
    Wong, Ka-Kin
    Hsu, Hsueh-Chuan
    Wu, Shih-Ching
    Ho, Wen-Fu
    JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 868
  • [30] Stress-Induced Martensitic Transformation in the Crack Tip Region of a NiTi Alloy
    Falvo, A.
    Furgiuele, F.
    Leonardi, A.
    Maletta, C.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2009, 18 (5-6) : 679 - 685