Design and structural analysis of 3-sided and 4-sided columns of a CNC machine using finite element analysis

被引：2

作者：

Gupta, Manu ^{[1
]}

Goswami, Chandramani ^{[1
]}

Khandelwal, Nikil ^{[1
]}

机构：

[1] Arya Coll Engn IT Jaipur, Dept Mech Engn, Jaipur, Rajasthan, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2021年 / 47卷

关键词：

Displacement; Finite element; Column; Stiffness; Parameters;

D O I：

10.1016/j.matpr.2021.04.397

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The design and structural analysis of any machine component becomes essential for increase the productivity. The purpose of research is to provide the best column support for a CNC machine. A hollow square box is a popular choice for a CNC machine column. A 3-sided column provides weight and cost reduction features. A number of parameters were used to analyse 3-sided and 4-sided columns. The array of the column analysed with the help of ANSYS. Derived parameter method of optimization was implemented to decide about the rank of optimization for the columns under scanner. In order to search for optimum column, most rigid column and most light column, only 14 competing cases of columns have been separated, analysed and discussed. (c) 2021 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the scientific committee of the Technology Innovation in Mechanical Engineering-2021.

引用

页码：5895 / 5900

页数：6

共 50 条

[31] Thermal-stress analysis and calculation of single and dual chip set double-sided circuit board based on three-dimensional finite element algorithm
Song, Lan
Zhao, Yang
Zhou, Yaoming
Xiang, Haifei
CIRCUIT WORLD, 2015, 41 (02) : 49 - 54
[32] Piezoelectric resonator design and analysis from stochastic car vibration using an experimentally validated finite element with viscous-structural damping model
Khazaee, Majid
Rezania, Alireza
Rosendahl, Lasse
SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS, 2022, 52
[33] Design optimization of high tibial osteotomy plates using finite element analysis for improved biomechanical effect
Koh, Yong-Gon
Lee, Jin-Ah
Lee, Hwa-Yong
Chun, Heoung-Jae
Kim, Hyo-Jeong
Kang, Kyoung-Tak
JOURNAL OF ORTHOPAEDIC SURGERY AND RESEARCH, 2019, 14 (1)
[34] Analysis of the tensile response of a stranded conductor using a 3D finite element model
Frigerio, M.
Buehlmann, P. B.
Buchheim, J.
Holdsworth, S. R.
Dinser, S.
Franck, Ch. M.
Papailiou, K.
Mazza, E.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2016, 106 : 176 - 183
[35] 3D Finite Element Analysis for Varicose Vein Therapy by Using Microwave Ablation
Phasukkit, P.
Prasantamrongsiri, S.
Pintavirooj, C.
Tungjitkusolmun, S.
Sanpanich, A.
5TH BIOMEDICAL ENGINEERING INTERNATIONAL CONFERENCE (BMEICON 2012), 2012, : 96 - 96
[36] Bending analysis of micropolar elastic beam using a 3-D finite element method
Huang, FY
Yan, BH
Yan, JL
Yang, DU
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, 2000, 38 (03) : 275 - 286
[37] Insights into the structural design strategies of multi-spot ultrasonic welded joints in thermoplastic composites: A finite element analysis
Zhao, Quanyue
Wu, Hantai
Chen, Xinyu
Ni, Yunzhu
An, Xuefeng
Wu, Wenwang
Zhao, Tian
COMPOSITE STRUCTURES, 2022, 299
[38] 3D Finite Element Analysis for Varicose Vein Therapy by Using Microwave Ablation
Prasantamrongsiri, S.
Phasukkit, P.
Pintavirooj, C.
Tungjitkusolmun, S.
Sanpanich, A.
5TH BIOMEDICAL ENGINEERING INTERNATIONAL CONFERENCE (BMEICON 2012), 2012,
[39] Vibration modelling and structural modification of combine harvester thresher using operational modal analysis and finite element method
Zare, Hamed Ghafarzadeh
Maleki, Ali
Rahaghi, Mohsen Irani
Lashgari, Majid
STRUCTURAL MONITORING AND MAINTENANCE, 2019, 6 (01): : 33 - 46
[40] Calculation of Maximum Torque Operating Conditions for Inverter-Fed Induction Machine Using Finite-Element Analysis
Cai, Haiwei
Gao, Le
Xu, Longya
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2019, 66 (04) : 2649 - 2658

← 1 2 3 4 5 →