Experimental study of wall-to-bed heat transfer in a supercritical water fluidized bed

被引:13
|
作者
Zhang, Tianning [1 ]
Lu, Youjun [1 ]
Yao, Liang [1 ]
机构
[1] Xi An Jiao Tong Univ, SKLMFPE, Xian 710049, Shaanxi, Peoples R China
基金
中国国家自然科学基金;
关键词
Supercritical water; Fluidized bed; Heat transfer; Experiment; HYDROGEN-PRODUCTION; BIOMASS GASIFICATION; NUMERICAL-SIMULATION; VERTICAL TUBE; PRESSURE; FLOW; MECHANISM; BEHAVIOR; BUNDLES; REACTOR;
D O I
10.1016/j.ijmultiphaseflow.2018.07.007
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Supercritical water (SCW) fluidized bed is a new reactor concept for hydrogen production from biomass or coal gasification. This paper presents an experimental study of wall-to-bed heat transfer characteristics for Geldart-B particles in SCW fluidized bed with the conditions of pressure ranges from 22.3 MPa to 25.7 MPa and temperature ranges from 651 K to 730K. The effects of velocity, temperature and pressure on wall-to-bed heat transfer coefficient in SCW fluidized bed were discussed. The wall-to-bed heat transfer coefficient was found to be positively correlated with velocity and pressure, while negatively correlated with temperature within present experimental conditions. A dimensionless analysis was conducted using the Buckingham-theorem to derive the general form of an empirical wall-to-bed heat-transfer correlation in supercritical water fluidized bed for the Nusselt number, which was finalized based on the experimental data. What's more, the sold phase contributes more to the wall-to-bed heat transfer in SCW fluidized bed and the presence of solid phase enhances the heat transfer of SCW phase, which can be concluded from comparison of heat transfer between SCW fluidized bed and single phase of SCW. The experimental results and the proposed correlation in present work are useful for the design of SCW fluidized bed reactor. (C) 2018 Elsevier Ltd. All rights reserved.
引用
收藏
页码:26 / 34
页数:9
相关论文
共 50 条
  • [41] BED-TO-WALL HEAT TRANSFER IN A SUPERCRITICAL CIRCULATING FLUIDISED BED BOILER
    Blaszczuk, Artur
    Nowak, Wojciech
    Jagodzik, Szymon
    CHEMICAL AND PROCESS ENGINEERING-INZYNIERIA CHEMICZNA I PROCESOWA, 2014, 35 (02): : 191 - 204
  • [42] Impact of bed motion on the wall-to-bed heat transfer for powders in a rotary kiln and effect of built-ins
    Moumin, Gkiokchan
    Tescari, Stefania
    Sattler, Christian
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2021, 177
  • [43] WALL-TO-BED HEAT-TRANSFER CHARACTERISTICS OF SPOUT-FLUID BEDS
    CHATTERJEE, A
    ADUSUMILLI, RSS
    DESHMUKH, AV
    CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 1983, 61 (03): : 390 - 397
  • [44] Numerical calculation of wall-to-bed heat transfer coefficients in Geldart B bubbling fluidized beds with immersed horizontal tubes
    Ostermeier, Peter
    Dawo, Fabian
    Vandersickel, Annelies
    Gleis, Stephan
    Spliethoff, Hartmut
    POWDER TECHNOLOGY, 2018, 333 : 193 - 208
  • [45] Experimental study of pressurized gas-fluidized bed heat transfer
    Looi, AY
    Mao, QM
    Rhodes, M
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2002, 45 (02) : 255 - 265
  • [46] Experimental study of a fluidized bed gas/solid heat transfer characteristics
    Reneng Dongli Gongcheng/Journal of Engineering for Thermal Energy and Power, (04): : 267 - 270
  • [47] WALL-TO-BED HEAT-TRANSFER IN 3-PHASE FLUIDIZED-BEDS OF LOW-DENSITY PARTICLES
    NORE, O
    WILD, G
    BRIENS, CL
    MARGARITIS, A
    CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 1994, 72 (03): : 546 - 550
  • [48] Investigation of bed-to-wall heat transfer characteristics in a rolling circulating fluidized bed
    Zhao, Tong
    Liu, Kai
    Murata, Hiroyuki
    Harumi, Kazuyoshi
    Takei, Masahiro
    POWDER TECHNOLOGY, 2015, 269 : 46 - 54
  • [49] FLUIDIZED BED HEAT TRANSFER
    WAMSLEY, WW
    JOHANSON, LN
    CHEMICAL ENGINEERING PROGRESS, 1954, 50 (07) : 347 - 355
  • [50] Cluster and Bed-to-wall Heat Transfer Characteristics in a Dual Circulating Fluidized Bed
    Seo, Myung Won
    Suh, Young Ho
    Kim, Sang Done
    Park, Sunwon
    Lee, Dong Hyun
    Song, Byung Ho
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2012, 51 (04) : 2048 - 2061