THERMAL ANALYSIS OF SOLIDIFYING SECONDARY PHASES IN THE EUTECTIC Al-Si ALLOY AND THE EFFECT OF Sr AND Fe

被引:0
作者
Manickaraj, Jeyakumar [1 ]
Gorny, Anton [1 ]
Shankar, Sumanth [1 ]
机构
[1] McMaster Univ, LMCRC, Dept Mech Engn, Hamilton, ON L8S 4L7, Canada
来源
SHAPE CASTING | 2014年
关键词
Al-Si eutectic alloy; Al-Fe-Si intermetallic; Thermal analysis; microstructure; Sr modification; ALUMINUM-ALLOYS;
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The effect of Fe and Sr on the evolution of the Fe intermetallic and eutectic phases in the Al-Si eutectic (Al-12.6 wt%Si) alloy was studied. Two different amounts of Sr (0.02 and 0.1 wt%) and three levels of Fe (0.5, 1 and 2 wt%) were introduced in the alloy; thermal analysis during solidification coupled with optical microscopy was carried out. It was observed, from the thermal data, that the nucleation temperature of the Fe intermetallic phase was not affected by the addition of Sr, but there is a significant variation in the heat balance during nucleation and growth of these phases during solidification. Additionally, the order of evolution of Al, Fe intermetallic phases and Si was significantly altered by the addition of Sr to the alloy. The analyses of the alloys showed that Fe intermetallic phase acted as nucleation sites for the Si phase while this was not the case in alloys with Sr addition. There is significant reduction in the size and alteration of the morphology of the Fe intermetallic phases when Sr was added to the alloy.
引用
收藏
页码:285 / 292
页数:8
相关论文
共 14 条
  • [1] Donahue Raymond Ph.D., 2000, Manufacturing Feasibility of All Aluminum Automotive Engines Via Application \\ of High Silicon Aluminum Alloy"
  • [2] Gorny A, 2013, MAT SCI TECHNOLOGY M, P1203
  • [3] Gorny A., 2012, THESIS MCMASTER U
  • [4] Evolution of Fe based intermetallic phases in Al-Si hypoeutectic casting alloys: Influence of the Si and Fe concentrations, and solidification rate
    Gorny, Anton
    Manickaraj, Jeyakumar
    Cai, Zhonghou
    Shankar, Sumanth
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 577 : 103 - 124
  • [5] Hatch JohnE., 1984, Aluminum: properties and physical metallurgy, V1
  • [6] Joseph R D, 1993, ASM INT HDB COMMITTE, P22
  • [7] Thermal analysis applied to estimation of solidification kinetics of Al-Si aluminium alloys
    Loizaga, A.
    Niklas, A.
    Fernandez-Calvo, A. I.
    Lacaze, J.
    [J]. INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2009, 22 (05) : 345 - 352
  • [8] THE MECHANISM OF SILICON MODIFICATION IN ALUMINUM-SILICON ALLOYS - IMPURITY INDUCED TWINNING
    LU, SZ
    HELLAWELL, A
    [J]. METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1987, 18 (10): : 1721 - 1733
  • [9] Makhlouf M M, 2005, AFS T, V05-88, P18
  • [10] Recent development in aluminium alloys for the automotive industry
    Miller, WS
    Zhuang, L
    Bottema, J
    Wittebrood, A
    De Smet, P
    Haszler, A
    Vieregge, A
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 280 (01): : 37 - 49