HIGH TEMPERATURE CHARACTERISTICS OF Ni3Al ALLOYS AT VARIOUS TESTING CONDITIONS

被引：0

作者：

Malcharczikova, Jitka ^{[1
]}

Michenka, Vit ^{[2
]}

Pohludka, Martin ^{[1
]}

Kursa, Miroslav ^{[1
]}

Kanak, David ^{[2
]}

机构：

[1] Tech Univ Ostrava, Fac Met & Mat Engn, Dept Nonferrous Met Refining Proc & Mat Recycling, Ostrava, Czech Republic

[2] VUHZ As, Dobra, Czech Republic

来源：

METAL 2014: 23RD INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS | 2014年

关键词：

Ni3Al based alloys; directional solidification; creep; mechanical characteristics; NICKEL-BASED SUPERALLOYS; MICROSTRUCTURE; STRESS;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Samples of Ni3Al based alloys with hypo-stoichiometric composition Ni-24Al and Ni-22Al were directionally solidified at rates of 50 and 70 mm/h. The directionally solidified samples were used for creep tests at 900 degrees C. Testing was performed under a load of 200 MPa in an argon atmosphere. Due to the fact that materials of this type are used in demanding environments, the selected tests were also performed in argon saturated with water vapour. It can be concluded that the applied atmospheres have no significant effect on the creep behaviour of the studied samples. The Ni-22Al alloy exhibits longer times to rupture than the alloy Ni-24Al under the same testing conditions. No significant differences in the appearance and quantity of corrosion products on the surface of the samples were observed.

引用

页码：1310 / 1315

页数：6

共 50 条

[31] Creep characteristics of porous Ni/Ni3Al anodes for molten carbonate fuel cells [J].

Kim, YS ;

Lee, KY ;

Chun, HS .

JOURNAL OF POWER SOURCES, 2001, 99 (1-2) :26-33

[32] High-temperature site preference and atomic short-range ordering characteristics of ternary alloying elements in γ′-Ni3Al intermetallics [J].

Eris, Rasim ;

Mekhrabov, Amdulla O. ;

Akdeniz, M. Vedat .

PHILOSOPHICAL MAGAZINE, 2017, 97 (29) :2615-2631

[33] Effect of the sintering temperature on the coating of duplex stainless steel with Ni3Al [J].

Cay, Vedat Veli ;

Kati, Nida ;

Ozan, Sermin ;

Cetin, Tayfun .

MATERIALS TESTING, 2018, 60 (06) :633-638

[34] Atomic simulation of fatigue crack propagation in Ni3Al [J].

Ma, Lei ;

Xiao, Shifang ;

Deng, Huiqiu ;

Hu, Wangyu .

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2015, 118 (04) :1399-1406

[35] Ductile thin foils of Ni3Al [J].

Demura, A ;

Kishida, K ;

Umezawa, O ;

George, EP ;

Hirano, T .

MECHANICAL PROPERTIES OF STRUCTURAL FILMS, 2001, 1413 :248-261

[36] Microstructure and mechanical properties of sputter deposited Ni/Ni3Al multilayer films at elevated temperature [J].

Zhang, Chao ;

Feng, Kai ;

Li, Zhuguo ;

Lu, Fenggui ;

Huang, Jian ;

Wu, Yixiong .

APPLIED SURFACE SCIENCE, 2016, 378 :408-417

[37] Evaluation of the wear properties of dual two-phase Ni3Al/Ni3V intermetallic alloys [J].

Wagle, Sanat ;

Kaneno, Yasuyuki ;

Nishimura, Rokuro ;

Takasugi, Takayuki .

TRIBOLOGY INTERNATIONAL, 2013, 66 :234-240

[38] Microstructure and properties of Ni3Al - TiC surface composites formed on Ni3Al using low-energy high-current electron beam [J].

Ivanov, Konstantin V. ;

Akimov, Kirill O. ;

Ivanova, Evgenia K. ;

Figurko, Marina G. .

VACUUM, 2024, 230

[39] NON-ALLOYED Ni3Al BASED ALLOYS - PREPARATION AND EVALUATION OF MECHANICAL PROPERTIES [J].

Malcharczikova, J. ;

Chmelik, F. ;

Pesicka, J. ;

Kursa, M. ;

Pohludka, M. .

METALURGIJA, 2013, 52 (03) :309-312

[40] Ni3Al-B ALLOYS AND THEIR MECHANICAL PROPERTIES AT HIGH TEMPERATURES [J].

Pohludka, Martin ;

Malcharczikova, Jitka ;

Kursa, Miroslav ;

Kawulok, Rostislav ;

Opela, Petr .

METAL 2016: 25TH ANNIVERSARY INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2016, :1498-1503

← 1 2 3 4 5 →