Influence of adding nanoparticles on solidification in a heat storage system considering radiation effect

被引：22
|
作者：
Li, Zhixiong [1 ,2 ]
Sheikholeslami, M. [3 ,4 ]
Shafee, Ahmad [5 ,6 ]
Ramzan, M. [7 ,8 ]
Kandasamy, R. [5 ]
Al-Mdallal, Qasem M. [9 ]
机构：
[1] Ocean Univ China, Sch Engn, Qingdao 266110, Peoples R China
[2] Univ Wollongong, Sch Mech Mat Mechatron & Biomed Engn, Wollongong, NSW 2522, Australia
[3] Babol Noshirvani Univ Technol, Dept Mech Engn, Babol Sar, Iran
[4] Babol Noshirvani Univ Technol, Renewable Energy Syst & Nanofluid Applicat Heat T, Babol Sar, Iran
[5] Univ Tun Hussein Onn Malaysia, FAST, Batu Pahat 86400, Johor State, Malaysia
[6] Publ Author Appl Educ & Training Coll Technol Stu, Appl Sci Dept, Shuwaikh, Kuwait
[7] Bahria Univ, Dept Comp Sci, Islamabad Campus, Islamabad 44000, Pakistan
[8] Sejong Univ, Dept Mech Engn, Seoul 143747, South Korea
[9] United Arab Emirates Univ, Dept Math Sci, Al Ain, U Arab Emirates
来源：
JOURNAL OF MOLECULAR LIQUIDS | 2019年 / 273卷
关键词：
Nanoparticle; FEM; Mesh refinement; Thermal radiation; Thermal energy storage; Solidification; NANOFLUID FLOW; MAGNETIC-FIELD; PCM SOLIDIFICATION; NATURAL-CONVECTION; MIXED CONVECTION; EXERGY LOSS; SIMULATION; IMPACT; CAVITY; ENCLOSURE;
D O I：
10.1016/j.molliq.2018.10.015
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
In this attempt, nanoparticle enhanced PCM is employed to enhance solidification rate. To augment low thermal conductivity of H2O, CuO nanoparticles were dispersed in it. Also Brownian motion impact was involved in properties of NEPCM. Graphs are obtained via FEM and displayed the impacts of radiation, length of fin and nanoparticles' size. Outputs display that selecting d(p) = 40nm leads to the fastest discharging. Discharging time reduces with increase of thermal radiation. (C) 2018 Elsevier B.V. All rights reserved.
引用
收藏
页码：589 / 605
页数：17
相关论文
共 50 条
  • [1] Influence of CuO nanoparticles on heat transfer behavior of PCM in solidification process considering radiative source term
    Sheikholeslami, M.
    Ghasemi, Arman
    Li, Zhixiong
    Shafee, Ahmad
    Saleem, S.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2018, 126 : 1252 - 1264
  • [2] Time dependent conduction heat transfer during solidification in a storage system using nanoparticles
    Sheikholeslami, M.
    Shehzad, S. A.
    Li, Zhixiong
    Shafee, Ahmad
    Abbasi, F. M.
    MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2019, 25 (06): : 2153 - 2169
  • [3] Lorentz forces effect on NEPCM heat transfer during solidification in a porous energy storage system
    Sheikholeslami, M.
    Li, Zhixiong
    Shafee, Ahmad
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2018, 127 : 665 - 674
  • [4] A numerical study on the combined effect of dispersed nanoparticles and embedded heat pipes on melting and solidification of a shell and tube latent heat thermal energy storage system
    Mahdavi, Mahboobe
    Tiari, Saeed
    Pawar, Vivek
    JOURNAL OF ENERGY STORAGE, 2020, 27
  • [5] Simulation of triplex-tube heat storage including nanoparticles, solidification process
    Wang, Renping
    Sheikholeslami, M.
    Mahmood, Barham Sabir
    Shafee, Ahmad
    Nguyen-Thoi, Trung
    JOURNAL OF MOLECULAR LIQUIDS, 2019, 296
  • [6] Utilizing copper oxide nanoparticles for expedition of solidification within a storage system
    Shafee, Ahmad
    Sheikholeslami, M.
    Jafaryar, M.
    Babazadeh, Houman
    JOURNAL OF MOLECULAR LIQUIDS, 2020, 302 (302)
  • [7] Influence of wavy enclosure and nanoparticles on heat release rate of PCM considering numerical study
    Chu, Yu-Ming
    Yadav, Dhananjay
    Shafee, Ahmad
    Li, Z.
    Quang-Vu Bach
    JOURNAL OF MOLECULAR LIQUIDS, 2020, 319
  • [8] Natural Convection Effect on Solidification Enhancement in a Multi-Tube Latent Heat Storage System: Effect of Tubes' Arrangement
    Tiji, Mohammadreza Ebrahimnataj
    Mahdi, Jasim M.
    Mohammed, Hayder I.
    Majdi, Hasan Sh.
    Ebrahimi, Abbas
    Mahani, Rohollah Babaei
    Talebizadehsardari, Pouyan
    Yaici, Wahiba
    ENERGIES, 2021, 14 (22)
  • [9] Solidification Enhancement in a Multi-Tube Latent Heat Storage System for Efficient and Economical Production: Effect of Number, Position and Temperature of the Tubes
    Li, Min
    Mahdi, Jasim M.
    Mohammed, Hayder I.
    Bokov, Dmitry Olegovich
    Mahmoud, Mustafa Z.
    Naghizadeh, Ali
    Talebizadehsardari, Pouyan
    Yaici, Wahiba
    NANOMATERIALS, 2021, 11 (12)
  • [10] Impact of periodic flow reversal of heat transfer fluid on the melting and solidification processes in a latent heat shell and tube storage system
    Riahi, Soheila
    Saman, Wasim Y.
    Bruno, Frank
    Belusko, Martin
    Tay, N. H. S.
    APPLIED ENERGY, 2017, 191 : 276 - 286
12345