Development of millimeter-wave devices based on liquid crystal polymer (LCP) substrate

被引:14
作者
Hosono, Ryohei [1 ]
Uemichi, Yusuke [1 ]
Hasegawa, Yuta [1 ]
Nakatani, Yusuke [1 ]
Kobayashi, Kiyoshi [1 ]
Guan, Ning [1 ]
机构
[1] Fujikura Ltd, 1440 Mutsuzaki, Sakura, Chiba 2858550, Japan
关键词
millimeter wave; dielectric material; liquid crystal polymer (LCP); mode transition; post wall waveguide (PWW); array antenna; filter; ARRAY ANTENNA; GUIDE; BAND; LINE; TRANSFORMER; TRANSITION; CIRCUITS; GHZ;
D O I
10.1587/elex.14.20172001
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
Millimeter-wave (mm-Wave) technology is a promising solution to meet ever-increasing demand in wireless data transmission capacity thanks to the availability of large bandwidths at mm-Wave frequencies, where the choice of dielectric materials is one of important issues because the high water absorption at mm-Wave frequencies restricts remarkably the choice. Liquid crystal polymer (LCP) is one of materials available for mm-Wave applications and is able to provide cost-effective solution. In this paper, features of LCP will be introduced for applications at V-band (60 GHz) and E-band (70 GHz, 80 GHz) in terms of dielectric constant, feasible structure, process and reliability. Some LCP-based devices such as transmission line, mode transition between different transmission-lines, antenna and filter will be reviewed. It is demonstrated that LCP-based devices actually have shown good performance and LCP is especially suitable for consumer applications that require high reliability and cost-effectiveness.
引用
收藏
页数:13
相关论文
共 24 条
[1]   Wideband Linear-to-Circular Polarization Converters Based on Miniaturized-Element Frequency Selective Surfaces [J].
Abadi, Seyed Mohamad Amin Momeni Hasan ;
Behdad, Nader .
IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, 2016, 64 (02) :525-534
[2]   A millimetre-wave bandpass filter-lens array [J].
Abbaspour-Tamijani, A. ;
Sarabandi, K. ;
Rebeiz, G. M. .
IET MICROWAVES ANTENNAS & PROPAGATION, 2007, 1 (02) :388-395
[3]   Manufacturing Reliability of LTCC Millimeter-Wave Passive Components [J].
Baras, Torben ;
Jacob, Arne F. .
IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, 2008, 56 (11) :2574-2581
[4]   The processing of liquid crystalline polymer printed circuits [J].
Farrell, B ;
St Lawrence, M .
52ND ELECTRONIC COMPONENTS & TECHNOLOGY CONFERENCE, 2002 PROCEEDINGS, 2002, :667-671
[5]  
Hasegawa Y., 2016, P IEICE GEN C
[6]   Millimeter-Wave Broadband Mode Transition between Grounded Coplanar Waveguide and Post-Wall Waveguide [J].
Hosono, Ryohei ;
Uemichi, Yusuke ;
Han, Xu ;
Guan, Ning ;
Nakatani, Yusuke .
IEICE TRANSACTIONS ON COMMUNICATIONS, 2016, E99B (01) :33-39
[7]  
Hosono R, 2014, IEEE ANTENNAS PROP, P1726, DOI 10.1109/APS.2014.6905189
[8]   A coaxial line to post-wall waveguide transition for a cost-effective transformer between a RF-device and a planar slot-array antenna in 60-GHz band [J].
Kai, Takafumi ;
Katou, Yusuke ;
Hirokawa, Jiro ;
Ando, Makoto ;
Nakano, Hiroshi ;
Hirachi, Yasutake .
IEICE TRANSACTIONS ON COMMUNICATIONS, 2006, E89B (05) :1646-1653
[9]  
Kawabata H., 2001, P AS PAC MICR C, V1322, DOI [10. 1109/ APMC. 2001. 985379, DOI 10.1109/APMC.2001.985379]
[10]  
Kishihara M., 2007, P AS PAC MICR C, V1, DOI [10. 1109/ APMC. 2007. 4554868, DOI 10.1109/APMC.2007.4554868]