Development of high capacity floppy disk "HiFD"

被引:2
|
作者
Okamoto, K [1 ]
Sasaki, Y [1 ]
Kudo, T [1 ]
Sasaki, K [1 ]
Nishida, Y [1 ]
Maeda, N [1 ]
Kondo, H [1 ]
机构
[1] Sony Corp, Sendai Technol Ctr, Tagajo, Miyagi 9850842, Japan
关键词
high capacity floppy disk; metal particle; surface roughness; durability;
D O I
10.1016/S0304-8853(98)00518-6
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
We report development of high capacity floppy disk "HiFD", by applying advanced metal particles with high performance to flexible disk. A 200 megabyte storage capacity is realized on 3.5 in floppy disk. In case of high capacity floppy disk the surface design of the disk is very important not only for recording characteristics but also durability and head flyability, because the contact condition of high capacity head differs from that of current MFD heads. To improve the durability of HiFD disk, the surface design was investigated in terms of size of abrasive particles. Flat surface with adequate height of spikes that were made of alumina fine particles is an important factor for durability. Flat surface may produce a stable air film on the disk, which makes less contact frequency and assures a long life time. (C) 1999 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:378 / 383
页数:6
相关论文
共 50 条
  • [41] Development and characterization of sustainable concrete incorporating a high volume of industrial waste materials
    Helmy, Sherif H.
    Tahwia, Ahmed M.
    Mahdy, Mohamed G.
    Abd Elrahman, Mohamed
    CONSTRUCTION AND BUILDING MATERIALS, 2023, 365
  • [42] High-volume fly ash system: Concrete solution for sustainable development
    Bilodeau, A
    Malhotra, M
    ACI MATERIALS JOURNAL, 2000, 97 (01) : 41 - 48
  • [43] Development of high-volume fly ash concrete with improved interfacial transition zone
    Xiao, Tianyu
    Liang, Xiangzhou
    Du, Sen
    JOURNAL OF BUILDING ENGINEERING, 2024, 87
  • [44] Development and Performance Evaluation of Very High Early Strength Geopolymer for Rapid Road Repair
    Hawa, Abideng
    Tonnayopas, Danupon
    Prachasaree, Woraphot
    Taneerananon, Pichai
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2013, 2013
  • [45] Development of polybenzimidazole/graphene oxide composite membranes for high temperature PEM fuel cells
    Uregen, Nurhan
    Pehlivanoglu, Kubra
    Ozdemir, Yagmur
    Devrim, Yilser
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2017, 42 (04) : 2636 - 2647
  • [46] Stochastic Development Model for Compressive Strength of Fly Ash High-Strength Concrete
    Gong, Jian
    Wang, Yuanfeng
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2021, 33 (12)
  • [47] Recent advances in high strength lightweight concrete: From development strategies to practical applications
    Lu, Jian-Xin
    CONSTRUCTION AND BUILDING MATERIALS, 2023, 400
  • [48] Development of a high cycle fatigue testing system and its application to thin aluminum film
    Bae, Jong-Sung
    Oh, Chung-Seog
    Park, Kyoung-Seok
    Kim, Sang-Kyo
    Lee, Hak-Joo
    ENGINEERING FRACTURE MECHANICS, 2008, 75 (17) : 4958 - 4964
  • [49] Steel Slag Accelerated Carbonation Curing for High-Carbonation Precast Concrete Development
    Li, Weilong
    Wang, Hui
    Liu, Zhichao
    Li, Ning
    Zhao, Shaowei
    Hu, Shuguang
    MATERIALS, 2024, 17 (12)
  • [50] Development of Nonproprietary Ultra-High-Performance Concrete Mixtures for Precast Bridge Girders
    Hong, H.
    Fatima, A.
    Mukhopadhyay, A.
    Hueste, M. D.
    Mander, J. B.
    Hurlebaus, S.
    ACI STRUCTURAL JOURNAL, 2024, 121 (05) : 123 - 135