A High Speed Transceiver Front-end Design with Fault Detection for FlexRay-based Automotive Communication Systems

被引：0

作者：

Wang, Chua-Chin ^{[1
]}

Chen, Chih-Lin ^{[1
]}

Yeh, Tai-Hao ^{[1
]}

Hu, Yi ^{[1
]}

Sung, Gang-Neng ^{[2
]}

机构：

[1] Natl Sun Yat Sen Univ, Dept Elect Engn, Kaohsiung 80424, Taiwan

[2] Natl Chip Implementat Ctr, Design Serv Dept, Natl Appl Res Labs, Hsinchu 30078, Taiwan

来源：

2011 IEEE INTERNATIONAL SYMPOSIUM ON CIRCUITS AND SYSTEMS (ISCAS) | 2011年

关键词：

FlexRay; transceiver; automobile electronics; in-car networking; failure detection;

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

This paper presents a high speed transceiver design with fault detection circuit compliant with FlexRay standards V2.1. An LVDS-like transmitter is utilized to drive the twisted pair of the bus. A current detector is included in the transceiver to detect the operating current so as to prevent over-current hazard. By contrast, a 3-comparator scheme is used to carry out the required bit-slicing and state recognition in the receiver of the bus. A bus line short-circuit detector is also included in the proposed receiver design.

引用

页码：434 / 437

页数：4

共 6 条

[1] [Anonymous], 2005, PROT SPEC V2 1, VV2
[2] [Anonymous], 2005, FLEXRAY COMM SYST EL, VV2
[3] Baronti F, 2006, DES AUT TEST EUROPE, P1536
[4] Mixed-Mode Behavioral Model of Flexray Physical Layer Transceiver
Muller, Candice
Valle, Maurizio
Buzas, Roman
Skoupy, Augustin
[J]. 2009 EUROPEAN CONFERENCE ON CIRCUIT THEORY AND DESIGN, VOLS 1 AND 2, 2009, : 527 - +
[5] Techmer A, 2006, P INT C NETW INT C S, P34
[6] A Transceiver Front End for Electronic Control Units in FlexRay-Based Automotive Communication Systems
Wang, Chua-Chin
Sung, Gang-Neng
Chen, Po-Cheng
Wey, Chin-Long
[J]. IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS I-REGULAR PAPERS, 2010, 57 (02) : 460 - 470

← 1 →