Microstructural evolution during creep test in 9Cr-2W-V-Ta steels and 9Cr-1 Mo-V-Nb steels

被引：35
作者：
Hasegawa, T
Abe, YR
Tomita, Y
Maruyama, N
Sugiyama, M
机构：
[1] Nippon Steel Corp Ltd, Oita R&D Lab, Oita 8700992, Japan
[2] Nippon Steel Corp Ltd, Steel Res Labs, Chiba 2938511, Japan
[3] Nippon Steel Corp Ltd, Adv Technol Res Labs, Chiba 2938511, Japan
来源：
ISIJ INTERNATIONAL | 2001年 / 41卷 / 08期
关键词：
low activation steel; ferritic steel; creep-rupture strength; toughness; tungsten; molybdenum; precipitate; Laves phase;
D O I：
10.2355/isijinternational.41.922
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In order to clarify the mechanism of remarkable creep strength of the 9Cr-2W-0.2V-Ta steels, high-Cr heat-resistant steels with Mo replaced by W and Nb by Ta for reducing induced radioactivity, the microstructural evolution during creep tests has been studied and compared with that in conventional 9Cr-1Mo-0.2V-Nb steels. Particular attention was called to quantitative analysis of solute W and Mo contents evaluated with the EDX spectra measured with the thin foil in the FE-TEM analysis. It has been supposed that the martensitic microstructure and fine MX-type precipitates have no significant effect on the difference in creep properties between the W-containing steel and the Mo-containing steel. Moreover the creep strength of the W-containing steel can not be attributed to the larger solid solution hardening by W. Mo distribution may encourage creep strain localization in solid solution, which results in the deterioration of creep strength of Mo-containing steels. Comparing M23C6 and Laves phase, the latter is assumed to be the main governing factor.
引用
收藏
页码：922 / 929
页数：8
相关论文
共 11 条
  • [1] Influence of tantalum and nitrogen contents, normalizing condition and TMCP process on the mechanical properties of low-activation 9Cr-2W-0.2V-Ta steels for fusion application
    Hasegawa, T
    Tomita, Y
    Kohyama, A
    [J]. JOURNAL OF NUCLEAR MATERIALS, 1998, 258 : 1153 - 1157
  • [2] Hasegawa T., UNPUB
  • [3] IGARASHI M, 1995, CAMP ISIJ, V8, P675
  • [4] R-AND-D OF LOW-ACTIVATION FERRITIC STEELS FOR FUSION IN JAPANESE UNIVERSITIES
    KOHYAMA, A
    KOHNO, Y
    ASAKURA, K
    KAYANO, H
    [J]. JOURNAL OF NUCLEAR MATERIALS, 1994, 212 : 684 - 689
  • [5] Low-activation ferritic and martensitic steels for fusion application
    Kohyama, A
    Hishinuma, A
    Gelles, DS
    Klueh, RL
    Dietz, W
    Ehrlich, K
    [J]. JOURNAL OF NUCLEAR MATERIALS, 1996, 233 : 138 - 147
  • [6] MASUMOTO H, 1986, P EPRI 1 INT C IMPR, P5
  • [7] MASUYAMA F, 1987, INT C ADV MAT TECHN, P259
  • [8] ON THE PRECIPITATION OF LAVES PHASE IN 12CR-MO-V-W STEEL HEATED FOR A LONG-TIME
    NAKAHASHI, M
    KOMATSU, S
    NAKAMURA, S
    YAMADA, M
    [J]. JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1983, 47 (05) : 426 - 431
  • [9] OHGAMI M, 1992, P 5 INT C CREEP MAT, P69
  • [10] SUDMAN B, 1985, CALPHAD, V9, P153
12