Preparation and thermal conductivity enhancement of composite phase change materials for electronic thermal management

被引：174

作者：

Wu, Weixiong ^{[1
]}

Zhang, Guoqing ^{[1
]}

Ke, Xiufang ^{[1
]}

Yang, Xiaoqing ^{[1
]}

Wang, Ziyuan ^{[1
]}

Liu, Chenzhen ^{[1
]}

机构：

[1] Guangdong Univ Technol, Sch Mat & Energy, Guangzhou 510006, Guangdong, Peoples R China

来源：

ENERGY CONVERSION AND MANAGEMENT | 2015年 / 101卷

关键词：

Phase change material; Thermal management; Electronic devices; Heat dissipation; MICROCHANNEL HEAT SINK; ENERGY STORAGE; TIP-CLEARANCE; PERFORMANCE; SIMULATION; EQUIPMENT; GRAPHITE; MATRIX; FLOW;

D O I：

10.1016/j.enconman.2015.05.050

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

A kind of phase change material board (PCMB) was prepared for use in the thermal management of electronics, with paraffin and expanded graphite as the phase change material and matrix, respectively. The as-prepared PCMB presented a large thermal storage capacity of 141.74 J/g and enhanced thermal conductivity of 7.654 W/(m K). As a result, PCMB displayed much better cooling effect in comparison to natural air cooling, i.e., much lower heating rate and better uniformity of temperature distribution. On the other hand, compared with ribbed radiator technology, PCMB also presented different cooling characteristics, demonstrating that they were suitable for different practical application. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：278 / 284

页数：7

共 29 条

[1]

AL S, 2000, J ELECTROCHEM SOC, V147, P3231

[2] Numerical investigations of using carbon foam/PCM/Nano carbon tubes composites in thermal management of electronic equipment [J].

Alshaer, W. G. ;

Nada, S. A. ;

Rady, M. A. ;

Le Bot, Cedric ;

Del Barrio, Elena Palomo .

ENERGY CONVERSION AND MANAGEMENT, 2015, 89 :873-884

[3]

[Anonymous], 1977, STIN

[4] Thermal performance of a PCM heat sink under different heat loads: An experimental study [J].

Baby, Rajesh ;

Balaji, C. .

INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2014, 79 :240-249

[5] Experimental investigations on phase change material based finned heat sinks for electronic equipment cooling [J].

Baby, Rajesh ;

Balaji, C. .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2012, 55 (5-6) :1642-1649

[6] Enhanced cooling for LED lighting using ionic wind [J].

Chen, Ing Youn ;

Guo, Mei-Zuo ;

Yang, Kai-Shing ;

Wang, Chi-Chuan .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2013, 57 (01) :285-291

[7] Enhancing heat transfer in microchannel heat sinks using converging flow passages [J].

Dehghan, Maziar ;

Daneshipour, Mandi ;

Valipour, Mohammad Sadegh ;

Rafee, Roohollah ;

Saedodin, Seyfolah .

ENERGY CONVERSION AND MANAGEMENT, 2015, 92 :244-250

[8] Thermal conductivity enhancement of phase change materials for thermal energy storage: A review [J].

Fan, Liwu ;

Khodadadi, J. M. .

RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2011, 15 (01) :24-46

[9] Effects of pin tip-clearance on the performance of an enhanced microchannel heat sink with oblique fins and phase change material slurry [J].

Far, Bahram Rajabi ;

Mohammadian, Shahabeddin K. ;

Khanna, Sanjeev K. ;

Zhang, Yuwen .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2015, 83 :136-145

[10] Cooling of portable hand-held electronic devices using phase change materials in finned heat sinks [J].

Fok, S. C. ;

Shen, W. ;

Tan, F. L. .

INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2010, 49 (01) :109-117

← 1 2 3 →