Finite element analysis of the clamp band joint

被引：19

作者：

Qin, Z. Y. ^{[1
]}

Yan, S. Z. ^{[1
]}

Chu, F. L. ^{[1
]}

机构：

[1] Tsinghua Univ, Dept Precis Instruments & Mechanol, Beijing 100084, Peoples R China

来源：

APPLIED MATHEMATICAL MODELLING | 2012年 / 36卷 / 01期

关键词：

FEM; Clamp band joint; Axial load capability; Axial stiffness; Damping; BOLTED JOINTS; STRESS;

D O I：

10.1016/j.apm.2011.07.022

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this paper, the clamp band joint commonly used to connect cylindrical shells with end flanges is modeled using the finite element analysis software ANSYS. The joint model is validated by a series of static experiments. Then the response of the joint components to the preload and the axial load is analyzed in detail, from which the axial load capability, the axial stiffness and the damping characteristics of the clamp band joint are discussed. Finally, parametric studies are carried out to investigate the effects of the preload, the wedge angle, the friction coefficient, and the number and size of the V-segment on the behavior of the clamp band joint. This paper presents the general mechanical behavior of the clamp band joint subjected to axial loads. (C) 2011 Elsevier Inc. All rights reserved.

引用

页码：463 / 477

页数：15

共 10 条

[1] Design improvement of clamped joints in front motorbike suspension based on FEM analysis [J].

Croccolo, D. ;

Cuppini, R. ;

Vincenzi, N. .

FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2009, 45 (6-7) :406-414

[2] Finite element analysis and modeling of structure with bolted joints [J].

Kim, Jeong ;

Yoon, Joo-Cheol ;

Kang, Beom-Soo .

APPLIED MATHEMATICAL MODELLING, 2007, 31 (05) :895-911

[3]

KNIGHT NF, 2008, 49 AIAA ASME ASCE AH, P1

[4]

*NASA GODD SPAC FI, 2000, MARM CLAMP SYST DES

[5] Dynamic analysis of clamp band joint system subjected to axial vibration [J].

Qin, Z. Y. ;

Yan, S. Z. ;

Chu, F. L. .

JOURNAL OF SOUND AND VIBRATION, 2010, 329 (21) :4486-4500

[6] Dynamic characteristics of launch vehicle and spacecraft connected by clamp band [J].

Qin, Zhao-Ye ;

Yan, Shao-Ze ;

Chu, Fu-Lei .

JOURNAL OF SOUND AND VIBRATION, 2011, 330 (10) :2161-2173

[7] Detailed modeling of bolted joints with slippage [J].

Reid, JD ;

Hiser, NR .

FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2005, 41 (06) :547-562

[8]

ROBERT DT, 1994, AIAA ASME ASCE AHS A, V1, P320

[9] Stress in V-section band clamps [J].

Shoghi, K ;

Barrans, SM ;

Rao, HV .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2004, 218 (03) :251-261

[10] Stress in a flat section band clamp [J].

Shoghi, K ;

Rao, HV ;

Barrans, SM .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2003, 217 (07) :821-830

← 1 →