Cutting forces and surface roughness in radiata pine routing and its relationship with acoustic emission

被引:0
作者
Vega, M. [2 ]
Aguilera, A. [1 ]
Meausoone, P. J. [3 ]
机构
[1] Univ Austral Chile, Fac Ciencias Forestales, Valdivia, Chile
[2] Ingn Forestal, Valdivia, Chile
[3] Univ Nancy 1, Ecole Natl Super Technol & Ind Bois, F-88051 Epinal 9, France
来源
MADERAS-CIENCIA Y TECNOLOGIA | 2007年 / 9卷 / 02期
关键词
radiata pine; cutting forces; acoustic emission; surface roughness;
D O I
10.4067/S0718-221X2007000200006
中图分类号
TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];
学科分类号
0805 ; 080502 ; 0822 ;
摘要
Chile produces more than 400 secondary products of radiata pine that are exported almost entirely. These exports have been increasing continuously and significantly in the last years, pointing at the potential of this species producing secondary products. Nevertheless, very few studies have been realized in secondary processes in order to determine appropriate relationships between cutting energy and surface roughness. The purpose of this study was to investigate for determined cutting conditions (peripheral cut 90-0) in radiata pine, the relationships between cutting forces, acoustic emission and surface quality. The experimental results shows that the acoustic emission signals are well correlated with the change of the cutting conditions and with the surface roughness, with increased roughness and acoustic emission signals with higher chip thickness. As regards to the cutting forces, the results are more accurate than acoustic emission, especially in the low levels of chip thickness. Both measurements show interesting relationships among each other that permits to conclude that more intense research on this topic is necessary linking the cuttings forces with measurement of acoustic emission.
引用
收藏
页码:161 / 169
页数:9
相关论文
共 13 条
[1]  
*ASTM, 2002, ANN BOOK ASTM STAND, P661
[2]   Using acoustic emission to predict surface quality [J].
Beggan, C ;
Woulfe, M ;
Young, P ;
Byrne, G .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 1999, 15 (10) :737-742
[3]  
BOUCHER J, 2003, 26 INT SEM WOOD MACH, P430
[4]   The effects of wood-fiber directions on acoustic emission in routing [J].
Cyra, G ;
Tanaka, C .
WOOD SCIENCE AND TECHNOLOGY, 2000, 34 (03) :237-252
[5]  
*INFOR, 2005, B ESTADISTICO INFOR, V101
[6]  
Kivimaa E, 1950, CUTTING FORCE WOOD W
[7]  
Koch P., 1964, Wood machining processes: CAB direct
[8]  
LEMASTER RL, 1982, WOOD SCI, V15, P150
[9]  
MURASE Y, 1994, 5 INT JOINT SEM FUT, P73
[10]  
Ratnasingam J., 2004, WOOD SANDING PROCESS