The surface modification of carbon fiber for thermoplastic HDPE composites

被引：8

作者：

Zhang Shengbo ^{[1
]}

Dai Qingling ^{[1
]}

机构：

[1] Jiujiang Univ, Sch Mech & Mat Engn, Jiujiang 332005, Jiangxi, Peoples R China

来源：

SURFACE AND INTERFACE ANALYSIS | 2019年 / 51卷 / 02期

关键词：

carbon fiber; functional groups; HDPE; SEM; surface treatment; HEAT-TREATMENT; TENSILE; PLASMA;

D O I：

10.1002/sia.6563

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

The interfacial adhesion strength between the fiber and the matrix greatly affects the properties of the carbon fiber (CF)-reinforced composite. The presence of surface functional groups on the fiber and changes in surface roughness were determined by X-ray photoelectron spectroscopy, scanning electron microscopy (SEM), and Raman spectroscopy. The effect of surface modification of CF on the mechanical properties and tribological properties of the composites is enhanced. The performance has been significantly improved. SEM analysis showed that modification had a positive effect on the interface between fiber and matrix. In the paper, the method of CF modification and the treatment of enhanced high-density polyethylene have simple and effective characteristics, which can be widely used and have guiding significance for industrial production.

引用

页码：184 / 189

页数：6

共 15 条

[1] Adsorption-oxidation of hydrogen sulfide on activated carbon fibers: effect of the composition and the relative humidity of the gas phase [J].

Bouzaza, A ;

Laplanche, A ;

Marsteau, S .

CHEMOSPHERE, 2004, 54 (04) :481-488

[2] Short fiber reinforced thermoplastic polyurethane elastomer composites [J].

Correa, RA ;

Nunes, RCR ;

Franco, WZ .

POLYMER COMPOSITES, 1998, 19 (02) :152-155

[3] Effect of sizing on carbon fiber surface properties and fibers/epoxy interfacial adhesion [J].

Dai, Zhishuang ;

Shi, Fenghui ;

Zhang, Baoyan ;

Li, Min ;

Zhang, Zuoguang .

APPLIED SURFACE SCIENCE, 2011, 257 (15) :6980-6985

[4] Modification of carbon fiber surfaces by electrochemical reduction of aryl diazonium salts: Application to carbon epoxy composites [J].

Delamar, M ;

Desarmot, G ;

Fagebaume, O ;

Hitmi, R ;

Pinson, J ;

Saveant, JM .

CARBON, 1997, 35 (06) :801-807

[5] Effects of fiber length and fiber orientation distributions on the tensile strength of short-fiber-reinforced polymers [J].

Fu, SY ;

Lauke, B .

COMPOSITES SCIENCE AND TECHNOLOGY, 1996, 56 (10) :1179-1190

[6] An improved method to make the microdroplet single fiber composite specimen for determining the interfacial shear strength [J].

Hou, Yongping ;

Sun, Tongqing .

JOURNAL OF MATERIALS SCIENCE, 2012, 47 (11) :4775-4778

[7] Tensile and thermomechanical properties of short carbon fiber reinforced polyamide 6 composites [J].

Karsli, Nevin Gamze ;

Aytac, Ayse .

COMPOSITES PART B-ENGINEERING, 2013, 51 :270-275

[8] The effect of surface modification with nitric acid on the mechanical and tribological properties of carbon fiber-reinforced thermoplastic polyimide composite [J].

Li, J. .

SURFACE AND INTERFACE ANALYSIS, 2009, 41 (09) :759-763

[9] Recent Progress in Fabrication, Structure, and Properties of Carbon Fibers [J].

Liu, Yaodong ;

Kumar, Satish .

POLYMER REVIEWS, 2012, 52 (3-4) :234-258

[10] Modification of carbon fiber by air plasma and its adhesion with BMI resin [J].

Liu, Zhe ;

Tang, Chao ;

Chen, Ping ;

Yu, Qi ;

Li, Wenkai .

RSC ADVANCES, 2014, 4 (51) :26881-26887

← 1 2 →