The influence of CNTs on the microstructure and ductility of CNT/Mg composites

被引：56
|
作者：
Han, G. Q. [1 ]
Shen, J. H. [2 ]
Ye, X. X. [2 ]
Chen, B. [2 ]
Imai, H. [2 ]
Kondoh, K. [2 ]
Du, W. B. [1 ]
机构：
[1] Beijing Univ Technol, Coll Mat Sci & Engn, Beijing, Peoples R China
[2] Osaka Univ, Joining & Welding Res Inst, Suita, Osaka 565, Japan
来源：
MATERIALS LETTERS | 2016年 / 181卷
关键词：
CNT/Mg composites; Microstructure; Twinning; Ductility; METAL-MATRIX COMPOSITES; CARBON NANOTUBES; GRAPHENE NANOPLATELETS; MECHANICAL-PROPERTIES; MAGNESIUM ALLOY; TENSILE; STRENGTH;
D O I：
10.1016/j.matlet.2016.06.021
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Powder metallurgy magnesium (Mg) composites reinforced with multi-walled carbon nanotubes (MWCNTs) were developed by an effective three-step process. CNT5 were uniformly dispersed on the Mg powders surface without damaged structure. A large amount of twins appeared in the as-extruded CNT/Mg composites, and the basal texture was weakened comparing to as-extruded pure Mg, which played a positive role in the ambient tensile deformation. The elongation to failure of Mg composite with 0.08 wt% CNT5 has increased greatly by 32%. (C) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码：300 / 304
页数：5
相关论文
共 50 条
  • [1] Acquiring well balanced strength and ductility of Cu/CNTs composites with uniform dispersion of CNTs and strong interfacial bonding
    Wang, Xinhua
    Guo, Baisong
    Ni, Song
    Yi, Jianhong
    Song, Min
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 733 : 144 - 152
  • [2] Strengthening Ni-Coated CNT/Mg Composites by Optimizing the CNT Content
    Xu, Jilei
    Zhang, Yizhuang
    Li, Zhiyuan
    Ding, Yunpeng
    Zhao, Xin
    Zhang, Xinfang
    Wang, Hanying
    Liu, Changhong
    Guo, Xiaoqin
    NANOMATERIALS, 2022, 12 (24)
  • [3] Synthesis of CNT-reinforced AZ31 magnesium alloy composites with uniformly distributed CNTs
    Han, Guoqiang
    Wang, Zhaohui
    Liu, Ke
    Li, Shubo
    Du, Xian
    Du, Wenbo
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 628 : 350 - 357
  • [4] Enhanced compressive response of hybrid Mg-CNT nano-composites
    Habibi, M. K.
    Paramsothy, M.
    Hamouda, A. M. S.
    Gupta, M.
    JOURNAL OF MATERIALS SCIENCE, 2011, 46 (13) : 4588 - 4597
  • [5] Influence of aging treatment on the microstructure and mechanical properties of CNTs/7075 Al composites
    Zhang, H. B.
    Wang, B.
    Zhang, Y. T.
    Li, Y.
    He, J. L.
    Zhang, Y. F.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 814
  • [6] Enhanced mechanical properties of CNTs/Mg biomimetic laminated composites
    Song, Zhengxiang
    Hu, Xiaoshi
    Xiang, Yeyang
    Wu, Kun
    Wang, Xiaojun
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 802
  • [7] Evolution of Microstructure and Mechanical Properties of CNTs/Al-Mg Composites Prepared by Powder Metallurgy
    Zhou, Lei
    Xu, Fushun
    Cai, Xiaolan
    Chen, Yaguang
    Guo, Li
    Yue, Youcheng
    INTEGRATED FERROELECTRICS, 2022, 228 (01) : 1 - 8
  • [8] Influence of Ni-CNTs additions on the microstructure and mechanical properties of extruded Mg-9Al alloy
    Liang, Junhao
    Li, Hejun
    Qi, Lehua
    Tian, Wenlong
    Li, Xuefeng
    Zhou, Jiming
    Wang, Dageng
    Wei, Jianfeng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 678 : 101 - 109
  • [9] A comparative review of Mg/CNTs and Al/CNTs composite to explore the prospect of bimetallic Mg-Al/CNTs composites
    Ali, Md. Hasan
    Rubel, Robiul Islam
    AIMS MATERIALS SCIENCE, 2020, 7 (03) : 217 - 243
  • [10] Design and Preparation of CNTs/Mg Layered Composites
    Zhang, Xiao
    Zou, Linchi
    Chen, Junfeng
    Dai, Pinqiang
    Pan, Jian
    MATERIALS, 2022, 15 (03)
12345