Surface texturing of the carbon steel AISI 1045 using femtosecond laser in single pulse and scanning regime

被引：16

作者：

Stasic, J. ^{[1
]}

Gakovic, B. ^{[1
]}

Perrie, W. ^{[2
]}

Watkins, K. ^{[2
]}

Petrovic, S. ^{[1
]}

Trtica, M. ^{[1
]}

机构：

[1] Univ Belgrade, VINCA Inst Nucl Sci, Belgrade 11001, Serbia

[2] Univ Liverpool, Dept Engn, Liverpool L69 3GH, Merseyside, England

来源：

APPLIED SURFACE SCIENCE | 2011年 / 258卷 / 01期

关键词：

Steel; Femtosecond laser; Laser processing; Periodic surface structures; PICOSECOND NDYAG LASER; 532; NM; ABLATION; METALS;

D O I：

10.1016/j.apsusc.2011.08.052

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

Surface texturing of the metals, including steels, gained a new dimension with the appearance of femtosecond lasers. These laser systems enable highly precise modifications, which are very important for numerous applications of metals. The effects of a Ti:sapphire femtosecond laser with the pulse duration of 160 fs, operating at 775 nm wavelength and in two operational regimes - single pulse (SP) and scanning regime, on a high quality AISI 1045 carbon steel were studied. The estimated surface damage threshold was 0.22 J/cm(2) (SP). Surface modification was studied for the laser fluences of 0.66, 1.48 and 2.37 J/cm(2). The fluence of 0.66 J/cm(2), in both working regimes, induced texturing of the material, i.e. formation of periodic surface structures (PSS). Their periodicity was in accordance with the used laser wavelength. Finally, changes in the surface oxygen content caused by ultrashort laser pulses were recorded. (C) 2011 Elsevier B.V. All rights reserved.

引用

页码：290 / 296

页数：7

共 30 条

[1] Avallone E.A., 2006, MARKS STANDARD HDB M, V11th
[2] Bauerle D., 2003, LASER PROCESSING CHE
[3] Femtosecond laser micromachining of technical materials
Bonse, J
Baudach, S
Krüger, J
Kautek, W
[J]. HIGH-POWER LASER ABLATION III, 2000, 4065 : 161 - 172
[4] Mechanisms of decomposition of metal during femtosecond laser ablation
Cheng, CR
Xu, XF
[J]. PHYSICAL REVIEW B, 2005, 72 (16)
[5] Effects of laser operating parameters on metals micromachining with ultrafast lasers
Cheng, J.
Perrie, W.
Edwardson, S. P.
Fearon, E.
Dearden, G.
Watkins, K. G.
[J]. APPLIED SURFACE SCIENCE, 2009, 256 (05) : 1514 - 1520
[6] Chichkov BN, 1996, APPL PHYS A-MATER, V63, P109, DOI 10.1007/BF01567637
[7] Choi H.W., 2007, THESIS OHIO STATE U
[8] Ablation of metals with picosecond laser pulses: Evidence of long-lived nonequilibrium conditions at the surface
Gamaly, EG
Madsen, NR
Duering, M
Rode, AV
Kolev, VZ
Luther-Davies, B
[J]. PHYSICAL REVIEW B, 2005, 71 (17)
[9] Overlapping rate effect on laser shock processing of 1045 steel by small spots with Nd:YAG pulsed laser
Hu, Yongxiang
Yao, Zhenqiang
[J]. SURFACE & COATINGS TECHNOLOGY, 2008, 202 (08) : 1517 - 1525
[10] A study of substrate temperature distribution during ultrashort laser ablation of bulk copper
Lam, Y. C.
Tran, D. V.
Zheng, H. Y.
[J]. LASER AND PARTICLE BEAMS, 2007, 25 (01) : 155 - 159

← 1 2 3 →