FABRICATION AND CHARACTERIZATION OF MULTIWALL CARBON NANOTUBE POLYLACTIDE FIBER COMPOSITES

被引：0
|
作者：
Tong, Lemuel K. W. [1 ]
Rizvi, Reza [1 ]
Biddiss, Elaine [1 ]
Naguib, Hani E. [1 ]
机构：
[1] Univ Toronto, Dept Mat Sci & Engn, Toronto, ON, Canada
来源：
PROCEEDINGS OF THE ASME CONFERENCE ON SMART MATERIALS, ADAPTIVE STRUCTURES AND INTELLIGENT SYSTEMS, 2010, VOL 2 | 2010年
关键词：
NANOCOMPOSITES; POLYMER;
D O I：
暂无
中图分类号：
TP18 [人工智能理论];
学科分类号：
081104 ; 0812 ; 0835 ; 1405 ;
摘要：
An extrusion melt fiber spinner is proposed for the fabrication of Multiwall Carbon Nanotube (MWNT) Polylactide (PLA) fiber composites. The melt fiber drawing system includes only feed rollers and a draw roller to allow the investigation of as-spun properties of the PLA fibers without the conventional heat treatment. The influence of the drawing parameters on the fiber quality is characterized by measuring the fiber diameters and draw ratios. Preliminary studies demonstrate that orientation and dispersion of MWNTs is feasible with this melt spinner design with improvements on the mechanical and thermal properties. Differential scanning calorimetry (DSC) results show an increase in the rate of cold-crystallization with increasing MWNT loading and tensile tests show that there is an optimal Young's modulus for 0.5 wt% MWNT loading.
引用
收藏
页码：129 / 135
页数：7
相关论文
共 50 条
  • [41] Characterization of polycarbonate/multiwalled carbon nanotube composites
    Kim, Hun-Sik
    Park, Byung-Hyun
    Kang, Minsung
    Yoon, Jin-San
    Jin, Hyoung-Joon
    Experimental Mechanics in Nano and Biotechnology, Pts 1 and 2, 2006, 326-328 : 1829 - 1832
  • [42] CHARACTERIZATION OF ELECTRICAL CONDUCTIVITY OF CARBON NANOTUBE COMPOSITES
    Gong, Shen
    Zhu, Zhenghong
    Li, Jun
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2014, VOL 9, 2015,
  • [43] Charge transport properties of water dispersible multiwall carbon nanotube-polyaniline composites
    Sangeeth, C. S. Suchand
    Jimenez, Pablo
    Benito, Ana M.
    Maser, Wolfgang K.
    Menon, Reghu
    JOURNAL OF APPLIED PHYSICS, 2010, 107 (10)
  • [44] A Review on Properties and Fabrication Techniques of Polymer/Carbon Nanotube Composites and Polymer Intercalated Buckypapers
    Khan, Faiza
    Kausar, Ayesha
    Siddiq, Muhammad
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2015, 54 (14) : 1524 - 1539
  • [45] Influence of rigid segment content on the piezoresistive behavior of multiwall carbon nanotube/segmented polyurethane composites
    Lozano-Perez, C.
    Cauich-Rodriguez, J. V.
    Aviles, F.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2017, 134 (06)
  • [46] Effects of nanotube modification on the dielectric behaviors and mechanical properties of multiwall carbon nanotubes/epoxy composites
    Guo, Xiusheng
    Yu, Demei
    Wu, Jingshen
    Min, Chao
    Guo, Rongnan
    POLYMER ENGINEERING AND SCIENCE, 2013, 53 (02) : 370 - 377
  • [47] Highly conductive multiwall carbon nanotube and epoxy composites produced by three-roll milling
    Rosca, Iosif D.
    Hoa, Suong V.
    CARBON, 2009, 47 (08) : 1958 - 1968
  • [48] Diffusion, Swelling and Electrical Properties of Polyisoprene/Multiwall Carbon Nanotube Composites in Organic Solvent Vapours
    Knite, M.
    Sakale, G.
    Teteris, V.
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2012, 12 (10) : 8123 - 8128
  • [49] Relations Between the Aspect Ratio of Carbon Nanotubes and the Formation of Percolation Networks in Biodegradable Polylactide/Carbon Nanotube Composites
    Wu, Defeng
    Wu, Liang
    Zhou, Weidong
    Sun, Yurong
    Zhang, Ming
    JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 2010, 48 (04) : 479 - 489
  • [50] Preparation and Properties of PP/PLA/multiwall Carbon Nanotube Composites Filaments Obtained by Melt Compounding
    Zou, Jing
    Zhang, YingChen
    Huang, Jingnan
    Wu, HongYan
    Qiu, Y. P.
    ECO-MATERIALS PROCESSING AND DESIGN X, 2009, 620-622 : 465 - +
12345