Sintering Behaviour and Mechanical Properties of Al-Cu-Mg-Si-Sn Aluminum Alloy

被引：15
|
作者：
Padmavathi, C. [1 ]
Upadhyaya, Anish [1 ]
机构：
[1] Indian Inst Technol, Dept Mat Sci & Engn, Kanpur 208016, Uttar Pradesh, India
来源：
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2011年 / 64卷 / 4-5期
关键词：
Aluminum alloys; Powder metallurgy; Sintering; Microstructure; Mechanical properties; PARTICLE-SIZE; COPPER ALLOYS; POWDER; ATMOSPHERE; MAGNESIUM; ADDITIONS; COMPACTS;
D O I：
10.1007/s12666-011-0089-2
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The present study investigates the effect of compaction pressure and sintering temperature on densification response and mechanical properties of the Al-3.8Cu-1Mg-0.8Si-0.3Sn (2712) alloy. The compacts were pressed at 200 and 400 MPa and sintered at temperatures ranging from 570-630A degrees C in vacuum (10(-6) Torr). The objective of the present work is to obtain an optimum sintering conditions for achieving higher sintered densities and mechanical properties. The effect of sintering temperature is evaluated by measuring the sintered density, densification parameter, microstructure, phase changes and mechanical properties. While a higher sintering temperature results in densification enhancement, it also leads to microstructural coarsening. Significant improvement in mechanical properties is obtained through age-hardening of sintered alloy under various ageing conditions (T4, T6 and T8).
引用
收藏
页码：345 / 357
页数：13
相关论文
共 50 条
  • [1] Sintering Behaviour and Mechanical Properties of Al–Cu–Mg–Si–Sn Aluminum Alloy
    C. Padmavathi
    Anish Upadhyaya
    Transactions of the Indian Institute of Metals, 2011, 64 : 345 - 357
  • [2] Microwave Assisted Sintering of Al-Cu-Mg-Si-Sn Alloy
    Padmavathi, Chandran
    Upadhyaya, Anish
    Agrawal, Dinesh
    JOURNAL OF MICROWAVE POWER AND ELECTROMAGNETIC ENERGY, 2012, 46 (03) : 115 - 127
  • [3] Effects of sintering time on the microstructure and properties of an Al-Cu-Mg alloy
    Du, Xinyang
    Liu, Rutie
    Xiong, Xiang
    Liu, Hongwei
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (05): : 9657 - 9666
  • [4] Effect of Thermal Exposure on Mechanical Properties of Al-Si-Cu-Ni-Mg Aluminum Alloy
    Chen, Fanming
    Liu, Chengwen
    Zuo, Lijie
    Wu, Zhiyuan
    He, Yiqiang
    Dong, Kai
    Li, Guoqing
    He, Weiye
    CRYSTALS, 2023, 13 (02)
  • [5] Effect of microwave and conventional heating on sintering behavior and properties of Al-Mg-Si-Cu alloy
    Padmavathi, C.
    Upadhyaya, A.
    Agrawal, D.
    MATERIALS CHEMISTRY AND PHYSICS, 2011, 130 (1-2) : 449 - 457
  • [6] Precipitation behavior and mechanical properties of Al-1.0Mg-0.6Si-Cu (wt.%) alloy controlled by Cu content
    Hou, Xingkai
    Qi, Peng
    Li, Bolong
    Wen, Shengping
    Wei, Wu
    Qi, Yutong
    Yin, Jiaming
    Nie, Zuoren
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2023, 129 (04):
  • [7] Microstructure, mechanical properties and precipitation evolution of nanocrystalline Al-Mg-Si-Cu aluminum alloy
    Liu M.-P.
    Ren X.-Y.
    Chen Y.-L.
    Jia Z.-H.
    Ding L.-P.
    Roven H.J.
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2023, 33 (06): : 1695 - 1706
  • [8] Effect of Cu and Sn additions on the thermal stability of Al-Mg-Si alloy
    Wu, Xian
    Liu, Xu
    Wang, Xuan
    Ma, Pin-Kui
    Guan, Zhi-Ping
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 894
  • [9] Improvement in the anisotropic mechanical properties and formability of Al-Si-Mg-Cu-based alloy sheets
    Jeon, J. G.
    Shin, J. H.
    Shin, S. E.
    Bae, D. H.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 799
  • [10] Sintering behaviour of Al-Cu-Mg-Si blends
    Falticeanu, C. L.
    Chang, I. T. H.
    Kim, J. S.
    Cook, R.
    PROGRESS IN POWDER METALLURGY, PTS 1 AND 2, 2007, 534-536 : 597 - +
12345