Enhancement of the fatigue strength of underwater wet welds by grinding and ultrasonic impact treatment

被引：48

作者：

Gao, Wenbin ^{[1
]}

Wang, Dongpo ^{[1
]}

Cheng, Fangjie ^{[1
]}

Deng, Caiyan ^{[1
]}

Liu, Yang ^{[1
]}

Xu, Wei ^{[2
]}

机构：

[1] Tianjin Univ, Sch Mat Sci & Engn, Tianjin Key Lab Adv Joining Technol, Tianjin 300072, Peoples R China

[2] Offshore Oil Engn Co Ltd, Tianjin 300072, Peoples R China

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2015年 / 223卷

关键词：

Underwater wet welding; Ultrasonic impact treatment; Fatigue; Microstructure; Residual stress; IMPROVEMENT; GROWTH;

D O I：

10.1016/j.jmatprotec.2015.04.013

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Grinding+underwater ultrasonic impact treatment (UUIT) is proposed to improve the fatigue property of underwater wet welded joints. Using single grinding or UUIT technique cannot improve the fatigue life significantly while the combination of the two can obtain great enhancement. The microstructures in the weld metal contain proeutectoid ferrite, side-plate ferrite and acicular ferrite and the microstructure in coarse grain heat affected zone (CGHAZ) is dominated by martensite. Compressive residual stress decreases the effective stress intensity factor range and extends the fatigue life. The transverse residual stresses on the surface of as-welded joint are compressive due to the fast cooling effect of water and it is less in weld metal (WM) than in CGHAZ, which results in the initiation of fatigue crack at WM. (C) 2015 Elsevier B.V. All rights reserved.

引用

页码：305 / 312

页数：8

共 20 条

[1]

[Anonymous], XIII181500 IIW

[2]

[Anonymous], 2010, D36M2010 AWS

[3] Effect of welding residual stresses on fatigue crack growth thresholds [J].