The evolution of physicochemical and transport properties of 6FDA-durene toward carbon membranes; from polymer, intermediate to carbon

被引:90
作者
Shao, L
Chung, TS
Pramoda, KP
机构
[1] Natl Univ Singapore, Dept Chem & Biomol Engn, Singapore 119260, Singapore
[2] Inst Mat Res & Engn, Singapore 117602, Singapore
[3] Natl Univ Singapore, Dept Chem, Singapore 119260, Singapore
关键词
carbon membranes; transport; fluoro-polyimide; thermal treatment; intermediate membranes;
D O I
10.1016/j.micromeso.2005.04.026
中图分类号
O69 [应用化学];
学科分类号
081704 ;
摘要
A high T-g material, which is 6FDA-durene (T-g: 425 degrees C) polyimide, is applied to study the T-g's effect on the evolution of physicochemical and transport properties of membranes from polymeric, intermediate to carbon stages. T-g greatly affects the configurational organization of membranes during pyrolysis especially at the intermediate stage (400-500 degrees C) and finally influences the pore size and pore size distribution of carbon membranes, which has been mostly ignored by the previous studies. The physicochemical and transport properties in various membrane stages are thoroughly characterized by TGA-FTIR, FTIR-ATR, XRD, thickness and gas transport tests. It is found that the membranes derived from the high T-g polyimides show a significant increase in chain mobility and physicochemical development in the intermediate stage. Interestingly, the gas permeability with annealing temperature show double peaks for medium-size gases such as OZ, NZ and CH4, and single peaks for light gases such as He, H-2 and CO2. In addition, the ideal selectivity generally shows double minimum values with annealing temperature. These phenomena may arise from the fact that significant physicochemical changes take place around the T-g, while the maximum degradation rate occurs at temperatures 70-100 degrees C above T-g. As compared with the trade-off line [L.M. Robeson, J. Membr. Sci. 62 (1991) 165], the temperature for membranes derived from the high T-g polyimide to surpass the trade-off line occurs around 450 C. This temperature is just fall on the intermediate-stage temperature range. The resultant carbon membranes pyrolyzed with 1 degrees C/min heating rate show better transport performance at low pyrolysis temperatures than those pyrolyzed with 3 degrees C/min heating rate. However, when the pyrolysis temperature is elevated to 800 degrees C, the resultant carbon membranes pyrolyzed by different protocols all show similar and superior performance for gas separation. (c) 2005 Elsevier Inc. All rights reserved.
引用
收藏
页码:59 / 68
页数:10
相关论文
共 35 条
[1]   Intermediate polymer to carbon gas separation membranes based on Matrimid PI [J].
Barsema, JN ;
Klijnstra, SD ;
Balster, JH ;
van der Vegt, NFA ;
Koops, GH ;
Wessling, M .
JOURNAL OF MEMBRANE SCIENCE, 2004, 238 (1-2) :93-102
[2]   Carbon molecular sieve membranes prepared from porous fiber precursor [J].
Barsema, JN ;
van der Vegt, NFA ;
Koops, GH ;
Wessling, M .
JOURNAL OF MEMBRANE SCIENCE, 2002, 205 (1-2) :239-246
[3]  
Chung TS, 1997, J APPL POLYM SCI, V65, P1555, DOI 10.1002/(SICI)1097-4628(19970822)65:8<1555::AID-APP13>3.0.CO
[4]  
2-V
[5]   ISOMERIC POLYIMIDES BASED ON FLUORINATED DIANHYDRIDES AND DIAMINES FOR GAS SEPARATION APPLICATIONS [J].
COLEMAN, MR ;
KOROS, WJ .
JOURNAL OF MEMBRANE SCIENCE, 1990, 50 (03) :285-297
[6]   Carbon composite membranes from Matrimid® and Kapton® polyimides for gas separation [J].
Fuertes, AB ;
Nevskaia, DM ;
Centeno, TA .
MICROPOROUS AND MESOPOROUS MATERIALS, 1999, 33 (1-3) :115-125
[7]   Preparation of supported asymmetric carbon molecular sieve membranes [J].
Fuertes, AB ;
Centeno, TA .
JOURNAL OF MEMBRANE SCIENCE, 1998, 144 (1-2) :105-111
[8]   Knudsen diffusion in microporous carbon membranes with molecular sieving character [J].
Gilron, J ;
Soffer, A .
JOURNAL OF MEMBRANE SCIENCE, 2002, 209 (02) :339-352
[9]   A review on the latest development of carbon membranes for gas separation [J].
Ismail, AF ;
David, LIB .
JOURNAL OF MEMBRANE SCIENCE, 2001, 193 (01) :1-18
[10]   CARBON MOLECULAR-SIEVE GAS SEPARATION MEMBRANES .1. PREPARATION AND CHARACTERIZATION BASED ON POLYIMIDE PRECURSORS [J].
JONES, CW ;
KOROS, WJ .
CARBON, 1994, 32 (08) :1419-1425