Optimization of TC11 alloy forging parameters using processing maps

被引：7

作者：

Li Miaoquan ^{[1
]}

Zhang Xiaoyuan ^{[1
]}

机构：

[1] NW Polytech Univ, Sch Mat Sci & Engn, Xian 710072, Peoples R China

来源：

RARE METALS | 2011年 / 30卷 / 03期

基金：

中国国家自然科学基金;

关键词：

forging; isothermal compression; optimization; titanium alloys; processing maps; HIGH-TEMPERATURE DEFORMATION; HOT DEFORMATION; BEHAVIOR; COMPRESSION; WORKING;

D O I：

10.1007/s12598-011-0372-8

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Isothermal compression of TC11 alloy at the deformation temperatures ranging from 1023 to 1323 K with an interval of 20 K, the strain rates of 0.001, 0.1, 1.0, and 10.0 s(-1), and the height reductions of 50% and 70% was conducted on a Gleeble-1500D thermomechanical simulator. According to the experimental results, the isothermal compression and the processing maps of TC11 alloy at different strains were drawn by using the dynamic material model (DMM). Based on the processing maps, the proper forging parameters, including a combination of deformation temperature and strain rate, vary with the strain in different phases of TC11 alloy.

引用

页码：222 / 226

页数：5

共 50 条

[41] Influence of microstructures and wear behaviors of the microalloyed coatings on TC11 alloy surface using laser cladding technique [J].

Yang, Chengyuan ;

Cheng, Xu ;

Tang, Haibo ;

Tian, Xiangjun ;

Liu, Dong .

SURFACE & COATINGS TECHNOLOGY, 2018, 337 :97-103

[42] An analysis of the hot forming characteristics of diffusion-bonded TC4 alloy using processing maps [J].

Imran, Sardar Muhammad ;

Li, Can ;

Lang, Lihui ;

Li, Yong ;

Zang, Bo ;

Ullah, Sattar ;

Li, Xiaoxing .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 127 (7-8) :3239-3253

[43] Globularization Mechanisms during Hot Deformation Processes of TC11 Alloy with Lamellar Structure [J].

Chen Huiqin ;

Cao Chunxiao ;

Guo Lingo ;

Lin Hai .

RARE METAL MATERIALS AND ENGINEERING, 2009, 38 (03) :421-425

[44] Effect of different oxidation modes on the growth of oxide layer of TC11 titanium alloy [J].

Li, Weiming ;

Yang, Zhong ;

Wang, Ping ;

Liu, Lele ;

Wang, Yimeng ;

Wang, Shaoqing ;

Chang, Li ;

Ma, Li .

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 32 :4265-4277

[45] Fatigue Strength Plateau Induced by Primary Alpha Phase Size in TC11 Alloy [J].

Shao, Ze ;

Zhang, Zhenjun ;

Liu, Rui ;

Qu, Zhan ;

Zhao, Zhenkai ;

Liu, Hanzhong ;

Pang, Jianchao ;

Zhang, Zhefeng .

ADVANCED ENGINEERING MATERIALS, 2025, 27 (05)

[46] Study on Interface of Linear Friction Welded Joint Between TC11 and TC17 Titanium Alloy [J].

Du Suigeng ;

Gao Man ;

Xu Wanting ;

Wang Xifeng .

ACTA METALLURGICA SINICA, 2019, 55 (07) :885-892

[47] Optimization of the Die Forging Parameters of 21-4N Heat-Resistant Steel by Processing Maps [J].

Huang, Xiaomin ;

Zang, Yong ;

Guan, Ben ;

Ji, Hongchao .

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2021, 74 (11) :2713-2728

[48] Effect of grain boundary on the ignition and flame propagation mechanisms of TC11 alloy in oxygen-enriched environment [J].

Wang, Congzhen ;

Li, Jianjun ;

Li, Yajun ;

Jin, Pengfei ;

Yu, Shuihan ;

Wu, Yuan ;

He, Guangyu ;

Huang, Jinfeng ;

Zhang, Cheng .

CORROSION SCIENCE, 2024, 237

[49] Optimization of the Die Forging Parameters of 21-4N Heat-Resistant Steel by Processing Maps [J].

Xiaomin Huang ;

Yong Zang ;

Ben Guan ;

Hongchao Ji .

Transactions of the Indian Institute of Metals, 2021, 74 :2713-2728

[50] Study of hot deformation of an Al-Cu-Mg alloy using processing maps and microstructural characterization [J].

Cepeda-Jimenez, C. M. ;

Ruano, O. A. ;

Carsi, M. ;

Carreno, F. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 552 :530-539

← 1 2 3 4 5 →