EFFECTS OF THERMAL MODIFICATION ON SURFACE CHARACTERISTICS OF OSB PANELS

被引：0

作者：

Unsal, Oner ^{[1
]}

Candan, Zeki ^{[1
]}

Buyuksari, Umit ^{[1
]}

Korkut, Suleyman ^{[2
]}

Babiak, Marian ^{[3
]}

机构：

[1] Istanbul Univ, Fac Forestry, Dept Forest Prod Engn, TR-34473 Istanbul, Turkey

[2] Duzce Univ, Fac Forestry, Dept Forest Ind Engn, TR-81620 Duzce, Turkey

[3] Tech Univ Zvolen, Fac Wood Sci & Technol, Dept Wood Sci, Zvolen 96053, Slovakia

来源：

WOOD RESEARCH | 2010年 / 55卷 / 04期

关键词：

Thermal modification; surface roughness; wettability; contact angle; oriented strand board; TEMPERATURE; WETTABILITY; ROUGHNESS; THICKNESS;

D O I：

暂无

中图分类号：

TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];

学科分类号：

0805 ; 080502 ; 0822 ;

摘要：

Thermal modification is an effective process to improve dimensional stability of wood and wood composite panels. Wettability of wood based panels is also an important issue and has been affected from heat treatment process. In this study oriented strandboard (OSB) panels were subjected thermal modification process. Wettability and surface roughness properties of the panels were evaluated. The results obtained in this study showed that the thermal modification process improved surface roughness parameters of all the treated panels compared to untreated control panels. The contact angle (CA) values of the treated panels were clearly higher than the untreated panels. The thermally treated panels had a poorer wettability property when compared to the untreated panels. The panels having smoother surface had greater CA values.

引用

页码：51 / 57

页数：7

共 13 条

[1]

[Anonymous], 1993, 317 EN

[2] Effects of surface inactivation, high temperature drying and preservative treatment on surface roughness and colour of alder and beech wood [J].

Aydin, I ;

Colakoglu, G .

APPLIED SURFACE SCIENCE, 2005, 252 (02) :430-440

[3] Activation of wood surfaces for glue bonds by mechanical pre-treatment and its effects on some properties of veneer surfaces and plywood panels [J].

Aydin, I .

APPLIED SURFACE SCIENCE, 2004, 233 (1-4) :268-274

[4]

AYDIN I, 2002, INT S 19 22 SEPT 200, P1

[5]

Aydin I., 2002, P 6 PAN PROD S 9 11, P60

[6] Surface characteristics of spruce veneers and shear strength of plywood as a function of log temperature in peeling process [J].

Aydin, Ismail ;

Colakoglu, Gursel ;

Hiziroglu, Salim .

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2006, 43 (20) :6140-6147

[7]

Ayrilmis N, 2009, BIORESOURCES, V4, P1536

[8]

Brochmann J, 2004, FOREST PROD J, V54, P51

[9]

Gu HM, 2005, FOREST PROD J, V55, P239

[10] Investigation of wood wettability changes during heat treatment on the basis of chemical analysis [J].

Hakkou, M ;

Pétrissans, M ;

Zoulalian, A ;

Gérardin, P .

POLYMER DEGRADATION AND STABILITY, 2005, 89 (01) :1-5

← 1 2 →