Effect of high temperature on mechanical and acoustic emission properties of calcareous-aggregate concrete

被引：37
|
作者：
Geng, Jishi [1 ]
Sun, Qiang [1 ]
Zhang, Weiqiang [1 ]
Lu, Chao [1 ]
机构：
[1] China Univ Min & Technol, Sch Resources & Geosci, Xuzhou 221116, Peoples R China
来源：
APPLIED THERMAL ENGINEERING | 2016年 / 106卷
关键词：
High temperature; Calcareous-aggregate concrete; Uniaxial compressive strength; Acoustic emissions; REACTIVE POWDER CONCRETE; HIGH-STRENGTH CONCRETE; FIRE-DAMAGED CONCRETE; BEHAVIOR;
D O I：
10.1016/j.applthermaleng.2016.06.107
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
In order to investigate the effect of high temperature (25-800 degrees C) on mechanical properties of concrete, uniaxial compression test is carried out to study the relationship between compressive strength and temperature, and the crack development in concrete specimen is monitored based on the acoustic emission (AE) phenomenon to reflect the change of internal cracks of concrete specimen under load. The test results show that the compressive strength of concrete is not obvious when the temperature is below 400 degrees C, but decreases with the increase of temperature and to 20% of that at room temperature when the temperature reaches 800 degrees C. The AE activity in the whole loading process and the cumulative counts and AE energy increase sharply to the critical point C until the specimens are completely damaged. The higher the temperature is, the more seriously the specimens are damaged and the less the acoustic emission signal is generated at the dynamic loading stage. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1200 / 1208
页数：9
相关论文
共 50 条
  • [41] Natural restoration of mechanical properties of concrete subjected to high temperature
    Li, Qingtao
    Pang, Haolei
    Yuan, Guanglin
    ADVANCES IN CEMENT RESEARCH, 2019, 31 (01) : 1 - 12
  • [42] The mechanical properties of recycled aggregate concrete
    Li, Zuoshan
    Xie, Lihui
    Luo, Junya
    Zhang, Xiangchao
    CONSTRUCTION AND URBAN PLANNING, PTS 1-4, 2013, 671-674 : 1852 - 1855
  • [43] Effects of aggregate types and softening effect on multiaxial mechanical properties of lightweight aggregate concrete
    Yang, Jianhui
    Yuan, Dongdong
    Huang, Dainwu
    Wang, Qinting
    CONSTRUCTION AND BUILDING MATERIALS, 2022, 353
  • [44] A study on the mechanical properties of self-compacting concrete at high temperature and after cooling
    Bamonte, Patrick
    Gambarova, Pietro G.
    MATERIALS AND STRUCTURES, 2012, 45 (09) : 1375 - 1387
  • [45] EFFECT OF REPLACING NATURAL AGGREGATE WITH PLASTIC AGGREGATE ON THE MECHANICAL PROPERTIES OF CONCRETE-REVIEW
    Omran, Shady
    Sisupalan, Samson
    CIVIL AND ENVIRONMENTAL ENGINEERING REPORTS, 2024, 34 (04) : 462 - 482
  • [46] Mechanical and acoustic emission characteristics of limestone after high temperature
    Wu, Gang
    Wang, Deyong
    TRENDS IN CIVIL ENGINEERING, PTS 1-4, 2012, 446-449 : 23 - +
  • [47] Effects of elevated temperature exposure on the mechanical properties of recycled fine aggregate concrete
    Wu, Chung-Hao
    Peng, Hsien-Sheng
    Liao, Chen-Chieh
    JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS, 2024, 47 (04) : 359 - 368
  • [48] Effects of elevated temperature on the mechanical properties of concrete with aggregate of waste porcelain tile
    Li, Qingtao
    Liu, Pu
    Wang, Minghua
    Xia, Haoran
    JOURNAL OF BUILDING ENGINEERING, 2023, 64
  • [49] Effect of elevated temperature on the mechanical properties of high-volume GGBS concrete
    Li, Qingtao
    Yuan, Guanglin
    Xu, Zhisong
    Dou, Tan
    MAGAZINE OF CONCRETE RESEARCH, 2014, 66 (24) : 1277 - 1285
  • [50] Effect of temperature on physical, mechanical and acoustic emission properties of Beishan granite, Gansu Province, China
    Yun Wu
    Xiao-Zhao Li
    Zhen Huang
    Sen Xue
    Natural Hazards, 2021, 107 : 1577 - 1592
12345