Effect of high temperature on mechanical and acoustic emission properties of calcareous-aggregate concrete

被引：37
|
作者：
Geng, Jishi [1 ]
Sun, Qiang [1 ]
Zhang, Weiqiang [1 ]
Lu, Chao [1 ]
机构：
[1] China Univ Min & Technol, Sch Resources & Geosci, Xuzhou 221116, Peoples R China
来源：
APPLIED THERMAL ENGINEERING | 2016年 / 106卷
关键词：
High temperature; Calcareous-aggregate concrete; Uniaxial compressive strength; Acoustic emissions; REACTIVE POWDER CONCRETE; HIGH-STRENGTH CONCRETE; FIRE-DAMAGED CONCRETE; BEHAVIOR;
D O I：
10.1016/j.applthermaleng.2016.06.107
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
In order to investigate the effect of high temperature (25-800 degrees C) on mechanical properties of concrete, uniaxial compression test is carried out to study the relationship between compressive strength and temperature, and the crack development in concrete specimen is monitored based on the acoustic emission (AE) phenomenon to reflect the change of internal cracks of concrete specimen under load. The test results show that the compressive strength of concrete is not obvious when the temperature is below 400 degrees C, but decreases with the increase of temperature and to 20% of that at room temperature when the temperature reaches 800 degrees C. The AE activity in the whole loading process and the cumulative counts and AE energy increase sharply to the critical point C until the specimens are completely damaged. The higher the temperature is, the more seriously the specimens are damaged and the less the acoustic emission signal is generated at the dynamic loading stage. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1200 / 1208
页数：9
相关论文
共 50 条
  • [31] The Effect of High Temperature on Concrete with Waste Ceramic Aggregate
    M. Canbaz
    Iranian Journal of Science and Technology, Transactions of Civil Engineering, 2016, 40 : 41 - 48
  • [32] Influences of Cooling Methods on Mechanical Properties of Recycled Aggregate Concrete after Exposure to High Temperature
    Ke X.
    Yang C.
    Su Y.
    An J.
    Su, Yisheng (suyisheng@sina.com), 1600, Tongji University (20): : 794 - 800
  • [33] Review of mechanical properties and strengthening mechanism of fully recycled aggregate concrete under high temperature
    Zheng, Yuanxun
    Xi, Xinyue
    Zhang, Yu
    Zhang, Peng
    Du, Chaowei
    CONSTRUCTION AND BUILDING MATERIALS, 2023, 394
  • [34] Creep mechanical properties and creep damage model of sandstone considering temperature effect based on acoustic emission
    Pan, Xiaokang
    Zhou, Xiaoping
    Zou, Yulin
    Lei, Deming
    Berto, Filippo
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2024, 47 (01) : 35 - 55
  • [35] Mechanical properties of cold bonded quarry dust aggregate concrete subjected to elevated temperature
    Thomas, Job
    Harilal, B.
    CONSTRUCTION AND BUILDING MATERIALS, 2016, 125 : 724 - 730
  • [36] Influence on mechanical properties and microstructure analysis of hybrid fiber recycled aggregate concrete after exposure to elevated temperature
    Zhang, Jinzhu
    Liu, Huaxin
    Liu, Genjin
    Wang, Xuezhi
    Geng, Jian
    Wang, Qingxuan
    Hussain, Abasal
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2023, 37 (16) : 2328 - 2347
  • [37] Research on splitting tensile mechanical properties of high-performance concrete after high temperature considering the influence of size effect
    Yu, Zhenpeng
    Shen, Linsong
    Zhang, Jun
    Peng, Shuai
    Zhao, Zhiqing
    Xie, Lei
    Sun, Xinjian
    JOURNAL OF BUILDING ENGINEERING, 2024, 94
  • [38] Effect of aggregate mineralogical properties on high strength concrete modulus of elasticity
    Kaya, Mustafa
    Komur, M. Aydin
    Gursel, Ercin
    ADVANCES IN CONCRETE CONSTRUCTION, 2022, 13 (06) : 411 - 422
  • [39] Review of Mechanical and Temperature Properties of Fiber Reinforced Recycled Aggregate Concrete
    Yao, Xinglong
    Pei, Zhiyang
    Zheng, Haoyuan
    Guan, Qizhou
    Wang, Fupeng
    Wang, Shuo
    Ji, Yongcheng
    BUILDINGS, 2022, 12 (08)
  • [40] Influence of high temperature on the mechanical properties of hybrid fibre reinforced normal and high strength concrete
    Varona, F. B.
    Baeza, F. J.
    Bru, D.
    Ivorra, S.
    CONSTRUCTION AND BUILDING MATERIALS, 2018, 159 : 73 - 82
12345