ROTATING EFFECT ON TRANSONIC SQUEALER TIP COOLING PERFORMANCE

被引:0
|
作者
Zhu, D. [1 ]
Lu, S. [2 ]
Ma, H. [1 ]
Zhang, Q. [3 ]
Teng, J. [2 ]
机构
[1] Univ Michigan Shanghai Jiao Tong Univ Joint Inst, Shanghai, Peoples R China
[2] Shanghai Jiao Tong Univ, Sch Aeronaut & Astronaut, Shanghai, Peoples R China
[3] City Univ London, London, England
基金
美国国家科学基金会;
关键词
LEADING-EDGE REGION; GAS-TURBINE BLADE; ROWS;
D O I
暂无
中图分类号
O414.1 [热力学];
学科分类号
摘要
The aerothermal behavior of turbine blade tip has been studied for decades, mostly using stationary linear cascade. The blade rotation effect still remains unclear to the tip research community. This paper investigates two squealer tip cooling configurations with the effect of relative casing movement. The numerical method was validated against thermal measurement obtained in a transonic wind tunnel. Further analysis is presented for cases with relative casing motion. Dramatic changes in aerodynamics and heat transfer were observed, mostly due to the strong interactions between the over tip leakage flow and the coolant injection. The need to consider the rotating effect into future experimental validation is highlighted.
引用
收藏
页数:10
相关论文
共 50 条
  • [41] Investigations on Uncertainty Quantification of Film Cooling Effectiveness and Aerodynamic Performance of Turbine Blade Squealer Tip
    Huang M.
    Li J.
    Li Z.
    Song L.
    Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University, 2021, 55 (05): : 181 - 192
  • [42] NUMERICAL INVESTIGATION OF THE EFFECT OF INLET FLOW ANGLE ON FILM COOLING PERFORMANCE FOR THE BLADE TIP WITH SUCTION SURFACE SQUEALER RIM
    Yu, Zhiqiang
    Liu, Jianjun
    Li, Chen
    An, Baitao
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2019, VOL 5A, 2019,
  • [43] Investigation of the film-cooling and flow characteristics of trapezoidal slot scheme on the blade tip with partial pressure side squealer in transonic flow
    Yao, Chun-yi
    Xia, Jun
    Zhang, Bo-lun
    Liao, Nai-bing
    Zhang, Zheng
    Zhu, Hui-ren
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2022, 179
  • [44] The effect of rail crown film hole injection angle and blowing ratio on the flow and cooling performance of the squealer tip in a turbine blade
    Zhou, Haimeng
    Luo, Lei
    Du, Wei
    Yan, Han
    Wang, Songtao
    APPLIED THERMAL ENGINEERING, 2024, 250
  • [45] Effects of Squealer Tip Cutbacks on Tip Leakage Flow and Film-Cooling Characteristics
    Cheng F.-N.
    Chang H.-P.
    Zhang J.-Y.
    Tian X.-J.
    Du Z.-N.
    Tuijin Jishu/Journal of Propulsion Technology, 2018, 39 (01): : 125 - 133
  • [46] Influence of Gas-to-Wall Temperature Ratio on the Leakage Flow and Cooling Performance of a Turbine Squealer Tip
    Yan, Dongjie
    Jiang, Hongmei
    Li, Jieling
    Xie, Wenbo
    Wang, Zhaoguang
    Lu, Shaopeng
    Zhang, Qiang
    AEROSPACE, 2022, 9 (10)
  • [47] Effect of shelf squealer tip configuration on aerothermal performance of gas turbine blade
    Kim, JeongJu
    Seo, Wonjik
    Chung, Heeyoon
    Bang, Minho
    Cho, Hyung Hee
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2021, 168
  • [48] Investigation of Film Cooling Effectiveness on Squealer Tip of a Gas Turbine Blade
    Yang, Dianliang
    Feng, Zhenping
    Yu, Xiaobing
    PROCEEDINGS OF THE ASME TURBO EXPO 2009, VOL 3, PTS A AND B, 2009, : 991 - 1000
  • [49] Effects of inclined squealer rims on tip leakage vortex and loss in a transonic axial turbine
    Wang, Yufan
    Zhang, Weihao
    Mu, Yumo
    Jiang, Shoumin
    Chen, Yun
    Ma, Guangjian
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 2023, 237 (02) : 236 - 250
  • [50] Investigations of film cooling and heat transfer on a turbine blade squealer tip
    He, Kun
    APPLIED THERMAL ENGINEERING, 2017, 110 : 630 - 647