Design for People Affected by Duchenne Muscular Dystrophy. Proposal of a New Type of Ankle Foot Orthosis [AFO] Based on 3D Indirect Survey and 3D Printing

被引:3
|
作者
Tursi, Alessandra [1 ]
Mincolelli, Giuseppe [2 ]
机构
[1] Univ Ferrara, Dipartimento Architettura, Ferrara, Italy
[2] Univ Ferrara, Ferrara, Italy
来源
ADVANCES IN DESIGN FOR INCLUSION | 2016年 / 500卷
关键词
Duchenne; Ankle foot orthosis; Laser scanner survey; Parametric design; 3D printing;
D O I
10.1007/978-3-319-41962-6_7
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Duchenne is a rare form of muscular dystrophy affecting 1 on 3.500 male children that, at about 8-12 years old progressively become wheelchair bounded, with an expectation of life on the late 20 or 30 years old. Due to muscles' weakening, Achilles tendon takes over on muscle tissue and starts to thicken and shrink in length, causing plantar flexion and retractions, while the function of AFOs is for applying a stretching force that can delay equine deformation of the feet. It is scientifically demonstrated that a constant use of night Ankle Foot Orthosis, together with physiotherapy, can extend the independent ambulation by up to two years and delay the occurrence of other complications. Moreover even once the child is wheelchair bounded, a further delay in retraction prevents contractures, complications and pains. Night Ankle Foot Orthoses are not a cure for DMD patients and Achille tendons' retractions at the end will in any case take over muscular strength. The research started from these premises to understand margin of improvements of current products and design an innovative type of static AFO. The obtained results at this stage prove that an innovative process is possible, it demonstrates with the case studies its great potential of application an improvement compared to current products, but it has to be further tested and developed in order to become a usable orthoses.
引用
收藏
页码:81 / 86
页数:6
相关论文
共 50 条
  • [1] Development of customized ankle-foot-orthosis using 3D scanning and printing technologies
    Kyeong-Jun Seo
    Bongcheol Kim
    Duhwan Mun
    Journal of Mechanical Science and Technology, 2023, 37 : 6131 - 6142
  • [2] Development of customized ankle-foot-orthosis using 3D scanning and printing technologies
    Seo, Kyeong-Jun
    Kim, Bongcheol
    Mun, Duhwan
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2023, 37 (12) : 6143 - 6151
  • [3] DESIGNING AND MANUFACTURING OF AN ANKLE ORTHOSIS USING 3D PRINTING TECHNOLOGY
    Pacurar, Ancuta
    Tomsea, Andreea
    Vilau, Cristian
    Gutiu, Eugen
    Pacurar, Razvan
    ACTA TECHNICA NAPOCENSIS SERIES-APPLIED MATHEMATICS MECHANICS AND ENGINEERING, 2021, 64 (04): : 561 - 564
  • [4] Design and 3D printing of a customised wrist-hand orthosis
    Ben Amor, Khaled
    Chatti, Sami
    Louhichi, Borhen
    Machado, Jose
    Tavares, Joao Manuel R. S.
    PROGRESS IN ADDITIVE MANUFACTURING, 2025, 10 (04) : 2715 - 2731
  • [5] Finite element analysis of the CFRP-based 3D printed ankle-foot orthosis
    Ali, Md Hazrat
    Smagulov, Zhalgas
    Otepbergenov, Temirlan
    5TH INTERNATIONAL CONFERENCE ON COMPUTER SCIENCE AND COMPUTATIONAL INTELLIGENCE 2020, 2021, 179 : 55 - 62
  • [6] Reliability and validity of 3D limb scanning for ankle-foot orthosis fitting
    Powers, Olivia A.
    Palmer, Jeff R.
    Wilken, Jason M.
    PROSTHETICS AND ORTHOTICS INTERNATIONAL, 2022, 46 (01) : 84 - 90
  • [7] Mechanical Analysis of a Customized Hand Orthosis Based on 3D Printing
    Wu, Jiawei
    Zhao, Cuilian
    Liu, Yexiao
    Ma, Shuangchi
    ADVANCED MANUFACTURING AND AUTOMATION VII, 2018, 451 : 501 - 508
  • [8] Mechanical Properties of Carbon Fiber Reinforced Materials for 3D Printing of Ankle Foot Orthoses
    Rybarczyk, Justyna
    Gorski, Filip
    Kuczko, Wieslaw
    Wichniarek, Radowslaw
    Siwiec, Sabina
    Vitkovic, Nikola
    Pacurar, Razvan
    ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2024, 18 (04) : 191 - 215
  • [9] A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design
    Le, Taoran
    Song, Bo
    Liu, Qi
    Bahr, Ryan A.
    Moscato, Stefano
    Wong, Ching-Ping
    Tentzeris, Manos. M.
    2015 IEEE 65TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC), 2015, : 981 - 986
  • [10] 3D Design Process: Case Study of Metaproject Analysis and 3D Printing Concept Proposal in the Field of Fashion
    Di Nicolantonio, Massimo
    Marano, Antonio
    Vallicelli, Andrea
    Angeloni, Giulia
    ADVANCES IN MANUFACTURING, PRODUCTION MANAGEMENT AND PROCESS CONTROL, 2019, 793 : 231 - 242