Forming behavior and workability of Hastelloy X superalloy during hot deformation

被引：72

作者：

Aghaie-Khafri, M. ^{[1
]}

Golarzi, N. ^{[1
]}

机构：

[1] KN Toosi Univ Technol, Fac Mech Engn, Tehran, Iran

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2008年 / 486卷 / 1-2期

关键词：

hot deformation; superalloy; Hastelloy X; workability;

D O I：

10.1016/j.msea.2007.11.059

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The hot deformation behavior of Hastelloy X superalloy has been characterized using hot compression tests in the temperature range of 900-1150 degrees C and strain rates varying between 0.001 and 0.5 s(-1). The results showed that both kinds of softening mechanisms, dynamic recovery and dynamic recrystallization, occurred during hot working. Hot workability of this alloy has been analyzed by calculating flow localization parameter and construction of workability map for occurrence of shear band. In addition, on the basis of flow stress data obtained as a function of temperature and strain rate in compression, power dissipation map and instability map for hot working have been developed. (c) 2007 Elsevier B.V. All rights reserved.

引用

页码：641 / 647

页数：7

共 20 条

[1] THEORY OF TENSILE TEST [J].

HART, EW .

ACTA METALLURGICA, 1967, 15 (02) :351-&

[2]

Liu JF, 2006, J IRON STEEL RES INT, V13, P319

[3] Microstructural modeling of metadynamic recrystallization in hot working of IN 718 superalloy [J].

Medeiros, SC ;

Prasad, YVRK ;

Frazier, WG ;

Srinivasan, R .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 293 (1-2) :198-207

[4]

MONETEILLET F, 1996, METALL MATER TRANS A, V27, P3346

[5] Identification of flow instabilities in the processing maps of AISI 304 stainless steel [J].

Murty, SVSN ;

Rao, BN ;

Kashyap, BP .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 166 (02) :268-278

[6] On the development of instability criteria during hotworking with reference to IN 718 [J].

Murty, SVSN ;

Rao, BN .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 254 (1-2) :76-82

[7]

NIELSEN DR, 1989, SUPERALLOYS 718 625, P119

[8] Hot forging of a nickel-base superalloy [J].

Park, NK ;

Kim, IS ;

Na, YS ;

Yeom, JT .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 111 (1-3) :98-102

[9]

PRASAD YVR, 1997, WORKING GUIDE COMPEN

[10] Processing maps for hot working of titanium alloys [J].

Prasad, YVRK ;

Seshacharyulu, T .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 243 (1-2) :82-88

← 1 2 →