LHCD and coupling experiments with an ITER-like PAM launcher on the FTU tokamak

被引:39
|
作者
Ridolfini, VP
Mirizzi, F
Apicella, ML
Barbato, E
Buratti, P
Calabrò, G
Cardinali, A
Granucci, G
Panaccione, L
Podda, S
Sozzi, C
Tuccillo, AA
机构
[1] EURATOM, ENEA Fus, I-00044 Frascati, Italy
[2] EURATOM, CEA Fus, DSM, DRFC,CEA Cardarache, F-13108 St Paul Les Durance, France
[3] EURATOM, ENEA, CNR Fus, IFP, I-20125 Milan, Italy
关键词
D O I
10.1088/0029-5515/45/9/008
中图分类号
O35 [流体力学]; O53 [等离子体物理学];
学科分类号
070204 ; 080103 ; 080704 ;
摘要
A prototype passive active multijunction (PAM) launcher for lower hybrid (LH) waves conceptually similar to that foreseen for ITER has been successfully tested on FTU at frequency f = 8 GHz. The power routinely and safely managed for the maximum time allowed by the LH power plant (0.9 s) without any fault in the transmission lines is 250 kW, corresponding to 75 MW m(-2) across the antenna active area and very close to the design value of 270 kW or 80 MW m(-2). The achieved value is at least 1.4 times larger than the ITER request, which would be only 52 MW m(-2), if the 33 MW m(-2) required to the ITER grill in order to couple 20 MW to the plasma, are scaled up linearly with f, from f(ITER) = 5 GHz. This linear scaling of the power handling capability of the LH antennae is indeed conservative with respect to the available data. The test results validate also the other two main expectations relevant to ITER, foreseen by the codes, namely to operate with the grill entirely in the vessel shadow and to still preserve good current drive (CD) efficiency. Even with the grill mouth retracted 2 mm inside the port shadow and with density in front of the launcher very close or even lower than the cut-off value, the PAM reflection coefficient is always <= 2.5%, if the antenna has been properly conditioned. The CD efficiency is comparable to that of a conventional grill, once the lower directivity is taken into account. Flexibility in determining the N-parallel to spectrum is also maintained, according to hard x-rays and electron cyclotron emission spectra. Conditioning the PAM in order to operate at the ITER equivalent power level required only one day of radio-frequency operation, without a previous baking of the waveguides.
引用
收藏
页码:1085 / 1093
页数:9
相关论文
共 47 条
  • [21] Residual carbon content in the initial ITER-Like Wall experiments at JET
    Brezinsek, S.
    Jachmich, S.
    Stamp, M. F.
    Meigs, A. G.
    Coenen, J. W.
    Krieger, K.
    Giroud, C.
    Groth, M.
    Philipps, V.
    Gruenhagen, S.
    Smith, R.
    van Rooij, G. J.
    Ivanova, D.
    Matthews, G. F.
    JOURNAL OF NUCLEAR MATERIALS, 2013, 438 : S303 - S308
  • [22] Micro-analyses of dust particles generated in the JET tokamak with the ITER-like wall
    Fazinic, Stjepko
    Bozicevic-Mihalic, Iva
    Provatas, Georgios
    Tadic, Tonci
    Rubel, Marek
    Fortuna-Zalesna, Elzbieta
    Widdowson, Anna
    NUCLEAR FUSION, 2020, 60 (12)
  • [23] Design study and preliminary feasibility analysis of divertor with ITER-Like PFU for advanced tokamak
    Peng, Xuebing
    Mao, Xin
    Liu, Peng
    Yang, Lei
    Qian, Xinyuan
    Song, Wei
    FUSION ENGINEERING AND DESIGN, 2021, 164
  • [24] Overview of erosion-deposition diagnostic tools for the ITER-Like Wall in the JET tokamak
    Rubel, M.
    Coad, J. P.
    Widdowson, A.
    Matthews, G. F.
    Esser, H. G.
    Hirai, T.
    Likonen, J.
    Linke, J.
    Lungu, C. P.
    Mayer, M.
    Pedrick, L.
    Ruset, C.
    JOURNAL OF NUCLEAR MATERIALS, 2013, 438 : S1204 - S1207
  • [25] Pedestal evolution physics in low triangularity JET tokamak discharges with ITER-like wall
    Bowman, C.
    Dickinson, D.
    Horvath, L.
    Lunniss, A. E.
    Wilson, H. R.
    Cziegler, I.
    Frassinetti, L.
    Gibson, K.
    Kirk, A.
    Lipschultz, B.
    Maggi, C. F.
    Roach, C. M.
    Saarelma, S.
    Snyder, P. B.
    Thornton, A.
    Wynn, A.
    Abduallev, S.
    Abhangi, M.
    Abreu, P.
    Afzal, M.
    Aggarwal, K. M.
    Ahlgren, T.
    Ahn, J. H.
    Aho-Mantila, L.
    Aiba, N.
    Airila, M.
    Albanese, R.
    Aldred, V.
    Alegre, D.
    Alessi, E.
    Aleynikov, P.
    Alfier, A.
    Alkseev, A.
    Allinson, M.
    Alper, B.
    Alves, E.
    Ambrosino, G.
    Ambrosino, R.
    Amicucci, L.
    Amosov, V.
    Sunden, E. Andersson
    Angelone, M.
    Anghel, M.
    Angioni, C.
    Appel, L.
    Appelbee, C.
    Arena, P.
    Ariola, M.
    Arnichand, H.
    Arshad, S.
    NUCLEAR FUSION, 2018, 58 (01)
  • [26] Effect of core-edge coupling on operation regimes of ITER-like reactor
    Stankiewicz, R
    Zagórski, R
    JOURNAL OF NUCLEAR MATERIALS, 2003, 313 : 899 - 903
  • [27] Surface composition and structure of divertor tiles following the JET tokamak operation with the ITER-like wall
    Lagoyannis, A.
    Tsavalas, P.
    Mergia, K.
    Provatas, G.
    Triantou, K.
    Tsompopoulou, E.
    Rubel, M.
    Petersson, P.
    Widdowson, A.
    Harissopulos, S.
    Mertzimekis, T. J.
    Abduallev, S.
    Abhangi, M.
    Abreu, P.
    Afzal, M.
    Aggarwal, K. M.
    Ahlgren, T.
    Ahn, J. H.
    Aho-Mantila, L.
    Aiba, N.
    Airila, M.
    Albanese, R.
    Aldred, V.
    Alegre, D.
    Alessi, E.
    Aleynikov, P.
    Alfier, A.
    Alkseev, A.
    Allinson, M.
    Alper, B.
    Alves, E.
    Ambrosino, G.
    Ambrosino, R.
    Amicucci, L.
    Amosov, V.
    Sunden, E. Andersson
    Angelone, M.
    Anghel, M.
    Angioni, C.
    Appel, L.
    Appelbee, C.
    Arena, P.
    Ariola, M.
    Arnichand, H.
    Arshad, S.
    Ash, A.
    Ashikawa, N.
    Aslanyan, V.
    Asunta, O.
    Auriemma, F.
    NUCLEAR FUSION, 2017, 57 (07)
  • [28] ITER-Like Tokamak Exhaust Gases in JET Active Gas Handling System: Process Optioneering
    Camp, P.
    Belonohy, E.
    Carvalho, I. S.
    Knipe, S.
    Lefebvre, X.
    Medley, S. A.
    Olney, R.
    Romanelli, S.
    Shaw, R. C. R.
    Smith, R.
    Wakeling, B.
    Walker, R. J.
    Wilsond, D.
    FUSION SCIENCE AND TECHNOLOGY, 2017, 71 (04) : 457 - 466
  • [29] Plasma heat load in the toroidal gaps of the ITER-like plasma facing units in WEST tokamak
    Tichit, Q.
    Aumeunier, M. H.
    Corre, Y.
    Dejarnac, R.
    Dubus, L.
    Gaspar, J.
    Gerardin, J.
    Grosjean, A.
    Gunn, J. P.
    Juven, A.
    Krieger, K.
    Tsitrone, E.
    NUCLEAR MATERIALS AND ENERGY, 2025, 42
  • [30] Manufacturing, testing and installation of the full tungsten actively cooled ITER-like divertor in the WEST tokamak
    Missirlian, M.
    Firdaouss, M.
    Richou, M.
    Hernandez, C.
    Gargiulo, L.
    Bucalossi, J.
    Brun, C.
    Corre, Y.
    Delmas, E.
    Greuner, H.
    Guillermin, B.
    Gunn, J.
    Hatchressian, J. C.
    Jalageas, R.
    Li, Q.
    Lipa, M.
    Lozano, M.
    Luo, G.
    Pocheau, C.
    Roche, H.
    Tsitrone, E.
    Vignal, N.
    Wang, W.
    Saille, A.
    Zago, B.
    FUSION ENGINEERING AND DESIGN, 2023, 193