Atypical grain coarsening of friction stir welded AA6082-T6: Characterization and modeling

被引：33
作者：
Huang, Yongxian [1 ]
Xie, Yuming [1 ]
Meng, Xiangchen [1 ]
Li, Junchen [1 ]
机构：
[1] Harbin Inst Technol, State Key Lab Adv Welding & Joining, Harbin 150001, Heilongjiang, Peoples R China
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2019年 / 740卷
基金：
中国国家自然科学基金;
关键词：
Grain coarsening; Dynamic recrystallization; Heterogeneous precipitation; Severe plastic deformation; Aluminum alloy; HIGH-PRESSURE TORSION; DYNAMIC RECRYSTALLIZATION; CELLULAR MICROSTRUCTURES; UNIFIED THEORY; GROWTH; PHASE; PRECIPITATION; TEXTURE; ALLOY; TEMPERATURE;
D O I：
10.1016/j.msea.2018.10.109
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
An atypical grain coarsening phenomenon was reported in welding nugget zone of friction stir welding for the first time. The average grain size and the aspect ratio were determined to be 266.3 mu m and 2.9, which were respectively 74.0 times and 1.9 times as those of conventional friction stir welding. A numerical model combining a macro finite model with a micro modified Wagner-Kampmann model was proposed to analyze the evolution mechanism of the atypical microstructure. The heterogeneous precipitation and the dynamic re crystallization were calculated. The unequiaxed coarse grains doped with a small amount of small grains were achieved under the extremely low heat input and the high plastic strain rate. The atypical coarsening phenomenon only occurred at certain conditions: (a) extremely high plastic strain and strain rate by friction stir welding; (b) an elevated temperature slightly above 0.5 melting point to inhibit the dynamic recrystallization refinement under higher temperature and shear induced refinement under lower temperature.
引用
收藏
页码：211 / 217
页数：7
相关论文
共 44 条
[1]   The role of the interface stiffness tensor on grain boundary dynamics [J].
Abdeljawad, Fadi ;
Foiles, Stephen M. ;
Moore, Alexander P. ;
Hinkle, Adam R. ;
Barr, Christopher M. ;
Heckman, Nathan M. ;
Hattar, Khalid ;
Boyce, Brad L. .
ACTA MATERIALIA, 2018, 158 :440-453
[2]   Development of a level set methodology to simulate grain growth in the presence of real secondary phase particles and stored energy - Application to a nickel-base superalloy [J].
Agnoli, Andrea ;
Bozzolo, Nathalie ;
Loge, Roland ;
Franchet, Jean-Michel ;
Laigo, Johanne ;
Bernacki, Marc .
COMPUTATIONAL MATERIALS SCIENCE, 2014, 89 :233-241
[3]   In-situ study of phase transformations during homogenization of 6005 and 6082 Al alloys [J].
Bayat, N. ;
Carlberg, T. ;
Cieslar, M. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 725 :504-509
[4]   Texture evolution in equal-channel angular extrusion [J].
Beyerlein, Irene J. ;
Toth, Laszlo S. .
PROGRESS IN MATERIALS SCIENCE, 2009, 54 (04) :427-510
[5]   Abnormal grain growth in friction stir processed alloys [J].
Charit, I. ;
Mishra, R. S. .
SCRIPTA MATERIALIA, 2008, 58 (05) :367-371
[6]   Multi-sheet structures in 7475 aluminum by friction stir welding in concert with post-weld superplastic forming [J].
Charit, I ;
Mishra, RS ;
Mahoney, MW .
SCRIPTA MATERIALIA, 2002, 47 (09) :631-636
[7]   Structural characterization of ultrafine-grained interstitial-free steel prepared by severe plastic deformation [J].
Cizek, J. ;
Janecek, M. ;
Krajnak, T. ;
Straska, J. ;
Hruska, P. ;
Gubicza, J. ;
Kim, H. S. .
ACTA MATERIALIA, 2016, 105 :258-272
[8]   Modeling over-ageing in Al-Mg-Si alloys by a multi-phase CALPHAD-coupled Kampmann-Wagner Numerical model [J].
Du, Qiang ;
Tang, Kai ;
Marioara, Calin D. ;
Andersen, Sigmund J. ;
Holmedal, Bjorn ;
Holmestad, Randi .
ACTA MATERIALIA, 2017, 122 :178-186
[9]   Texture development and grain refinement in non-equal-channel angular-pressed Al [J].
Gu, C. F. ;
Toth, L. S. .
SCRIPTA MATERIALIA, 2012, 67 (01) :33-36
[10]   Grain-boundary kinetics: A unified approach [J].
Han, Jian ;
Thomas, Spencer L. ;
Srolovitz, David J. .
PROGRESS IN MATERIALS SCIENCE, 2018, 98 :386-476
12345