Quality detection and control during laser cutting progress with coaxial visual monitoring

被引：20
|
作者：
Wen, Peng [1 ]
Zhang, Yongqiang [2 ]
Chen, Wuzhu [3 ]
机构：
[1] Tsinghua Univ, Dept Mech Engn, Beijing 100084, Peoples R China
[2] Shougang Res Inst Technol, Beijing 100043, Peoples R China
[3] Tsinghua Univ, Dept Mech Engn, Beijing 100084, Peoples R China
来源：
JOURNAL OF LASER APPLICATIONS | 2012年 / 24卷 / 03期
关键词：
laser cutting; quality detection; quality control; coaxial visual monitoring; cutting front; spark;
D O I：
10.2351/1.4719933
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A system of coaxial visual detection and closed-loop control is developed in laser cutting to automatically optimize cutting speed to obtain best cutting quality. The sparks behavior is observed under different cutting speeds by side visual monitoring. It is proved that the maximum number of pixels of various radiation brightness ranges of the coaxially detected sparks corresponds to the optimal cutting speed, represented by the lowest bottom roughness on cut face. By coaxial visual monitoring of cutting front and sparks, the standard deviations of shape parameters of cutting front and the average length of certain brightness range of sparks are, respectively, used as the signals for cutting defects and the bottom roughness. The results show that the optimal cutting speed for free defect and low bottom roughness could be determined and kept on-line by the developed system. (C) 2012 Laser Institute of America.
引用
收藏
页数：10
相关论文
共 30 条
  • [1] In-line monitoring of focus shift by kerf width detection with coaxial thermal imaging during laser cutting
    Vasileska, Ema
    Pacher, Matteo
    Previtali, Barbara
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 118 (7-8) : 2587 - 2600
  • [2] In-line monitoring of focus shift by kerf width detection with coaxial thermal imaging during laser cutting
    Ema Vasileska
    Matteo Pacher
    Barbara Previtali
    The International Journal of Advanced Manufacturing Technology, 2022, 118 : 2587 - 2600
  • [3] Quality monitoring and assurance for laser beam cutting using a thermographic process control
    Haferkamp, H
    Goede, M
    von Busse, A
    OPTICAL MEASUREMENT SYSTEMS FOR INDUSTRIAL INSPECTION, 1999, 3824 : 383 - 391
  • [4] Coaxial camera-based monitoring of fiber laser cutting of thick plates
    Levichev, Nikita
    Rodrigues, Goncalo Costa
    Vorkov, Vitalii
    Duflou, Joost R.
    OPTICS AND LASER TECHNOLOGY, 2021, 136
  • [5] IN-PROCESS MONITORING DURING CO2-LASER CUTTING
    LEIDINGER, D
    LASERS IN ENGINEERING, 1995, 4 (03) : 243 - 254
  • [6] THE INFLUENCE OF CUTTING PARAMETERS ON SURFACE QUALITY AND NITROGEN CONSUMPTION DURING LASER CUTTING
    Musil, Vaclav
    Sadilek, Marek
    Cep, Robert
    Malotova, Sarka
    MM SCIENCE JOURNAL, 2018, 2018 : 2363 - 2366
  • [7] Control of the surface plasma during pulsed laser cutting
    Bielesch, U
    Napp, M
    Schafer, JH
    Uhlenbusch, J
    XI INTERNATIONAL SYMPOSIUM ON GAS FLOW AND CHEMICAL LASERS AND HIGH-POWER LASER CONFERENCE, 1997, 3092 : 631 - 634
  • [8] Monitoring and adaptive control of CO2 laser flame cutting
    Sichani, E. Fallahi
    De Keuster, J.
    Kruth, J. -P.
    Duflou, J. R.
    LASER ASSISTED NET SHAPE ENGINEERING 6, PROCEEDINGS OF THE LANE 2010, PART 2, 2010, 5 : 483 - 492
  • [9] A Study on the Interference of Position Detection Systems During Laser Cutting
    Lü C.
    Wu Z.
    Yang S.
    Jia S.
    Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University, 2019, 53 (02): : 150 - 156
  • [10] Development of information-measuring channels of the monitoring system of quality cut for technological process laser cutting of materials
    Sukhov, YT
    Matiushin, IV
    LASER-ASSISTED MICROTECHNOLOGY 2000, 2001, 4157 : 88 - 92
123