Enhanced Tensile Ductility of AZ80 Magnesium Alloy

被引：0

作者：

Qiao, Jun ^{[1
]}

Wang, Yu ^{[1
]}

Shi, Guodong ^{[1
]}

Nie, Baoxin ^{[1
]}

机构：

[1] Univ Sci & Technol Liaoning, Coll Mat Sci & Met, Anshan 114051, Liaoning, Peoples R China

来源：

MATERIALS AND DESIGN, PTS 1-3 | 2011年 / 284-286卷

关键词：

AZ80 magnesium alloy; tensile ductility; superplasticity; stress exponent; creep; AL-ALLOYS; DEFORMATION; MECHANISMS;

D O I：

10.4028/www.scientific.net/AMR.284-286.1635

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Tensile behaviors of extruded and rolled AZ80 Mg alloy were investigated with elongation-to-failure tensile tests at constant temperatures of 300 degrees C, 350 degrees C, 400 degrees C, and 450 degrees C, and constant strain rates of 10(-2) s(-1) and 10(-3) s(-1). Experimental data show that the material exhibits tensile ductilities of over 100% at 400 degrees C and 450 degrees C, featured by long steady state deformation. Microstructure studies show that annealed coarse grains were remained in the gauge region during the tensile tests, and the enhanced tensile ductilities resulted from dislocation creep, other than dynamic recrystallization or grain boundary sliding. Cavity evolution and recrystallized coarse grains near fracture end caused premature failure of the material.

引用

页码：1635 / 1638

页数：4

共 11 条

[1] Superplastic Response of Continuously Cast AZ31B Magnesium Sheet Alloys [J].

Boileau, J. M. ;

Friedman, P. A. ;

Houston, D. Q. ;

Luckey, S. G. .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2010, 19 (04) :467-480

[2] The hot blow forming of AZ31 Mg sheet: Formability assessment and application development [J].

Carter, Jon T. ;

Krajewski, Paul E. ;

Verma, Ravi .

JOM, 2008, 60 (11) :77-81

[3] Effect of Microstructure on Cavitation during Hot Deformation of a Fine-Grained Aluminum-Magnesium Alloy as Revealed through Three-Dimensional Characterization [J].

Chang, Jung-Kuei ;

Taleff, Eric M. ;

Krajewski, Paul E. .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009, 40A (13) :3128-3137

[4] Principles of grain refinement and superplastic flow in magnesium alloys processed by ECAP [J].

Figueiredo, Roberto B. ;

Langdon, Terence G. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 501 (1-2) :105-114

[5]

Lu Zhi-wen, 2009, Chinese Journal of Nonferrous Metals, V19, P785

[6]

MCQUEEN HJ, 1991, Z METALLKD, V82, P336

[7] High temperature tensile behaviors of extruded and rolled AZ31 Mg alloy [J].

Qiao J. ;

Wang Y. ;

Shi G.-D. .

Transactions of Nonferrous Metals Society of China (English Edition), 2010, 20 (SUPPL. 2) :s540-s544

[8] Superplasticity-like creep behavior of coarse grained ternary Al alloys [J].

Qiao Jun ;

Taleff, E. M. .

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2010, 20 (04) :564-571

[9] Deformation and reconstruction mechanisms in coarse-grained superplastic Al-Mg alloys [J].

Soer, W. A. ;

Chezan, A. R. ;

De Hosson, J. Th. M. .

ACTA MATERIALIA, 2006, 54 (14) :3827-3833

[10] Cavitation during grain-boundary-sliding deformation in an AZ61 magnesium alloy [J].

Takigawa, Yorinobu ;

Aguirre, Juan Velazquez ;

Taleff, Eric M. ;

Higashia, Kenji .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 497 (1-2) :139-146

← 1 2 →