Elaboration and relationships between structure and rheological properties of microtalc or nanotalc/polyamide composites

This study focuses on the elaboration of nanocomposites processed by melt mixing of a polyamide 12 matrix and a hydrogel filled with synthetic talc particles. The systems are obtained by simultaneous mixing using either an internal mixer or a lab twin-screw extruder. The structure and rheological properties of synthetic talc/polyamide composites are compared with those of natural talc/polyamide microcomposites and modified montmorillonite/polyamide nanocomposites. A multiscale structure, composed of numerous nanometric particles but also few micrometric aggregates, is obtained for synthetic talc/polyamide composites. In terms of processability, the lab twin-screw extruder is more adequate than the internal mixer for the elaboration of synthetic talc/polyamide composites with relatively high filler volume fractions. For composites elaborated with the extruder, the percolation threshold, estimated from linear viscoelastic measurements, is close to 1, 6, and 11%, respectively, with modified montmorillonite, synthetic talc, and natural talc particles, in agreement with structural results. (c) 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 42299.