Correlation between compounding sequence and the properties of glass fiber-Reinforced nylon-6,6 composite

被引：8
|
作者：
Mun, Hyung Jin [1 ]
Cha, Sang Hoon [1 ]
Choi, Pil Sung [1 ]
Kim, Jae Ik [1 ]
Ryu, Sung Hun [1 ]
机构：
[1] Kyung Hee Univ, Dept Chem Engn, Coll Engn, Yonginsi, Kyunggido, South Korea
来源：
POLYMER ENGINEERING AND SCIENCE | 2019年 / 59卷 / 01期
关键词：
MECHANICAL-PROPERTIES; PROCESSING CONDITIONS; RHEOLOGICAL PROPERTIES; POLYPROPYLENE; MORPHOLOGY; BEHAVIOR; INTERFACE; BLENDS;
D O I：
10.1002/pen.24881
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
The effects of the compounding sequence and addition of maleic anhydride grafted polypropylene (PP-g-MAH) as a sizing agent on the properties of glass fiber (GF)/nylon-6,6 composite were investigated. Mechanical properties of tensile, impact, and flexural strength were measured. The fractured surface was analyzed to compare the variation of interfacial characteristics by different compounding sequences and addition of a sizing agent. It was found that mechanical and rheological properties of a composite are strongly affected by the compounding sequence and the addition of a sizing agent. In general, the addition of PP-g-MAH results in lowering the mechanical properties compared to GF/nylon-6,6, while proper compounding sequence results in improved mechanical properties. Lowering melt viscosity of composites is achieved by addition of sizing agent and varied depending on the compounding sequence. POLYM. ENG. SCI., 59:155-161, 2019. (c) 2018 Society of Plastics Engineers
引用
收藏
页码：155 / 161
页数：7
相关论文
共 50 条
  • [31] Formation and properties of nylon-6 and nylon-6/montmorillonite composite nanofibers
    Li, Lei
    Bellan, Leon M.
    Craighead, Harold G.
    Frey, Margaret W.
    POLYMER, 2006, 47 (17) : 6208 - 6217
  • [32] EFFECTS OF MOISTURE ON MECHANICAL-PROPERTIES OF GLASS-FILLED NYLON-6,6
    HUANG, JC
    WU, TH
    WU, CL
    SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 1995, 4 (03): : 199 - 203
  • [33] THERMOMECHANICAL PROPERTIES OF NYLON-6,6 ANNEALED IN GLYCEROL
    MITOMO, H
    KURIYAMA, I
    POLYMER, 1982, 23 (09) : 1377 - 1380
  • [34] COMPRESSIVE CREEP AND ITS RECOVERY OF GLASS FIBER REINFORCED NYLON-6 PLASTICS
    SUZUKI, M
    JINEN, E
    YAMAMOTO, I
    KOBUNSHI KAGAKU, 1973, 30 (03) : 150 - 155
  • [35] GLASS REINFORCED 6,6 NYLON FOR STRUCTURAL PARTS
    FIKES, TA
    PROCEEDINGS FROM STRUCTURAL PLASTICS 89 CONFERENCE AND NEW PRODUCT DESIGN COMPETITION /, 1989, : 211 - 214
  • [36] GLASS REINFORCED 6,6 NYLON FOR STRUCTURAL PARTS
    FIKES, TA
    PROCEEDINGS FROM STRUCTURAL PLASTICS 89 CONFERENCE AND NEW PRODUCT DESIGN COMPETITION, 1989, : 211 - 214
  • [37] Mechanical behavior of glass fiber-reinforced Nylon-6 syntactic foams and its Young's modulus numerical study
    Yanez-Macias, Roberto
    Rivera-Salinas, Jorge E.
    Solis-Rosales, Silvia
    Orduna-Altamirano, Daniel
    Ruiz-Mendoza, David
    Herrera-Guerrero, Adan
    Lara-Sanchez, Jesus
    Gonzalez-Morones, Pablo
    Garcia-Hernandez, Zureima
    Hernandez-Hernandez, Ernesto
    Gregorio-Jauregui, Karla M.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2021, 138 (27)
  • [38] Study of the mechanical behaviour of a short glass fiber-reinforced polyamide 6,6
    Atidel, Ghorbel
    Saintier, Nicolas
    Dhiab, Abderrazak
    Dammak, Fakhreddine
    MECANIQUE & INDUSTRIES, 2011, 12 (05): : 333 - 342
  • [39] Physicomechanical properties, machinability, and morphological behavior of short glass fiber-reinforced nylon 6 composites
    Jawali, N. Dayananda
    Siddeswarappa, B.
    Siddaramaiah
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2006, 25 (13) : 1409 - 1418
  • [40] Prediction of failure properties of injection-molded short glass fiber-reinforced polyamide 6,6
    Sasayama, Toshiki
    Okabe, Tomonaga
    Aoyagi, Yoshiteru
    Nishikawa, Masaaki
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2013, 52 : 45 - 54
12345